Safety Notes; Transport, Storage And Packaging; Technical Data - oventrop Regumat DN32 Installation And Operating Instructions Manual

2 Safety notes

2.1 Correct use
Safety in operation is only guaranteed if the boiler
connection system is used correctly.
The boiler connection system "Regumat" allows a
time- and space-saving connection of the boiler to
the pipework.
Any use of the boiler connection system outside the
above applications will be considered as non-com-
pliant and misuse. Claims of any kind against the ma-
nufacturer and/or his authorised representatives due
to damages caused by incorrect use cannot be ac-
cepted.
The observance of the installation and operating in-
structions is part of the compliance terms.
2.2 Possible dangers at the installation location
The case of an external fire has not been taken into
consideration when constructing the boiler connection
system.
WARNING
Heavy product group
Risk of injury Suitable transport and lifting devi-
ces are to be used. Wear suitable protective clot-
hing (e.g. safety shoes) during installation and use
safety devices. External components like handw-
heels or pressure test points must not be misused
for the absorption of external forces, e.g. as con-
nection point for lever tools etc.
Hot and cold surfaces
Risk of injury Do not touch the boiler connection
system without safety gloves. It may get very hot
during operation.
Sharp edges
Risk of injury Only touch with safety gloves.
Threads, bore holes and edges are sharp.
Small components
Risk of ingestion Store and install the boiler con-
nection system out of reach of children.
Allergies
Health hazard Do not touch the boiler con-
nection system and avoid any contact if allergies
against the used materials are known.
2.3 Installation, initial operation, maintenance
Installation, initial operation, maintenance and repairs
have to be carried out by authorised and qualified
tradesmen.
(EN 5011 part 1 and VDE 1000 part 10 for work on
the electrical installation)
10
3 Transport, storage and
packaging
3.1 Transport inspection
Upon receipt check delivery for any damages caused
during transit.
Any damage must be reported immediately upon re-
ceipt.
3.2 Packaging
All packaging material must be environmentally
friendly disposed of.

4 Technical data

4.1 Performance data
Nominal dimension:
Max. operating pressure:
Max. operating temperature for
"Regumat" with standard pump:
Max. operating temperature for
"Regumat" with universal thermal
insulation and high-efficiency pump: 95 °C
k value:
vs
Regumat S-180
Regumat M3-180
Opening pressure
check valve:
Distance between
pipe centres:
Connections:
Fluid: Non-aggressive fluids (e.g. water and suitable
water and glycol mixtures according to VDI 2035).
Not suitable for steam, oily and aggressive fluids.
DANGER
Suitable measures (e.g. safety valves) have to be
taken to ensure that the maximum operating pres-
sures and maximum and minimum operating tem-
peratures are not exceeded or undercut.
DN 32
10 bar PN10
110 °C
9.8
8.1
20 mbar
125 mm
G 2 male
thread,
flat sealing