5.11 Wall mounting device
The wall mounting device features locations for a tem-
perature sensor.
6 Operation
6.1 Bleeding the system
Before initial operation, the system must be filled and
bled with due consideration of the permissible ope-
rating pressures.
6.2 Correction factors for mixtures of water and
glycol
The correction factors of the manufacturers of the an-
tifreeze liquids have to be considered when setting
the flow rate.
7 Accessories
The tailpipe sets for the connection to the pipework
are to be ordered separately.
A bracket for fixing the pump group onto the wall is
to be ordered separately.
The complete range of accessories can be found in
the catalogue.
8 Maintenance
The boiler connection system is maintenance-free.
9 Warranty
Oventrops warranty conditions valid at the time of
supply are applicable.
Sensor
location
15