How To Use The Cruise Control Lever (If Equipped) [Hst Type Only]; Tractor Lights - Kubota L3301 Operator's Manual

INSTRUMENT PANEL AND CONTROLS
15.1 How to use the cruise control lever (if
equipped) [HST type only]
(1) Cruise control lever
To engage the cruise control device
The proper forward speed will be maintained if you
apply the cruise-control-lever at any position.
1. To operate faster than the set speed, depress the
speed-control-pedal further down in the proper
forward speed.
The set speed will be resumed if you release the
speed-control-pedal.
NOTE :
• When you stand up from the operator's seat
with the speed-control-pedal stepped on or the
cruise-control-lever engaged on, the engine will
stop regardless of whether the tractor is moving
or not.
The engine stop is because that the tractor is
equipped with the operator-presence-control-
system (OPC).
To disengage the cruise control device
1. Move the cruise-control-lever all the way back.
2. Move the cruise-control-lever to the "OFF" position
to release the cruise control.
3. Depress both brake pedals.
NOTE :
• Cruise control will be disengaged automatically
when both brake pedals are depressed.
• Cruise-control-device does not disengage when
the individual right or left brake is applied.
42
(A) Increase
(B) Decrease
(C) Off
FOOT CONTROLS AND HAND CONTROLS

TRACTOR LIGHTS

(1) Head light
(2) Turn signal / hazard light
(3) Rear turn signal / hazard
light
(4) Tail light
L3301,L3901