Hydraulic Control Unit Use-Reference Chart - Kubota M4N-071 Operator's Manual

HYDRAULIC UNIT

5. Hydraulic control unit use-reference chart

In order to handle the hydraulics properly, the operator must be familiar with the following.
Although this information may not be applicable to all types of implements and soil conditions, it is useful for general
conditions.
Implement
Moldboard plow
Disc plow
Harrow (spike, spring-
tooth, disc type)
Subsoiler, etc.
Weeder, ridger, etc.
Earth mover, digger,
scraper, manure fork,
rear carrier, etc.
Mower (mid-and rear-
mount type) Hay rake,
tedder, etc.
86
Top link mounting holes
Soil condition
Light soil
Medium soil
Heavy soil
---
---
---
REMOTE HYDRAULIC CONTROL SYSTEM
(1) Position control lever
(2) Draft control lever
3
2 or 3
2
Draft and mixed control
(place the draft control lever to the
2 or 3
suitable position and set the imple-
ment pull with the position control lev-
2
1 (hold the draft control lever at the
frontmost position during operation).
Gauge wheel
er).
Position control
M4N-071, M5N-091, M5N-111
Yes/No
Yes
Yes/No
No