Kubota M4N-071 Operator's Manual page 25

CARE OF THE SAFETY LABELS
• Keep the safety labels clean and free from obstructing material.
• Clean the safety labels with soap and water, dry with a soft cloth.
• Replace damaged or missing safety labels with new labels from your local KUBOTA Dealer.
• If a component with safety label(s) affixed is replaced with new part, make sure new label(s) is (are) attached in
the same location(s) as the replaced component.
• Mount new safety labels by applying on a clean dry surface and pressing any bubbles to outside edge.
M4N-071, M5N-091, M5N-111
SAFE OPERATION
19