Light Switch; Turn Signal Switch And Hazard Light Switch; Rear Turn Signal Light And Hazard Light - Kubota M4N-071 Operator's Manual

OPERATING THE TRACTOR
(1) Steering wheel tilt pedal

6. Light switch

Turn the light switch clockwise, and the following lights
are activated on the switch position.
(1) Head light switch
Head lights OFF.
Head lights dimmed, low
beam. Tail lights ON.
7. Turn signal switch and hazard
light switch
Hazard light
1. When the hazard light switch is pushed, the hazard
lights flash, along with the LH and RH indicators on
the instrument panel.
2. Push the hazard light switch again to turn off the
hazard lights.
Turn signal light
To indicate a right turn, turn the turn signal light switch
clockwise. To indicate a left turn, turn the turn signal
light switch counter-clockwise. The corresponding right
and left turn signal lights and indicator on the
instrument panel will flash.
54
(A) "PRESS DOWN"
Head lights ON, high beam.
Tail light ON.
NOTE :
• The hazard light switch is operative when the
key switch is in the "ON", "ACC" or "OFF"
position.
• The turn signal light switch is only operative
when the key switch is in the "ON" position.
• Be sure to return the turn signal switch to its
center position after turning.
(1) Hazard light switch
(2) Turn signal light switch
(3) Hazard and turn signal indi-
cator
(1) Hazard and turn signal light
8. Rear turn signal light and hazard
light
If necessary, raise and turn the light stay to the
rearward for the work.
Return the light stay to the original position when
traveling on a road.
STARTING THE TRACTOR
(A) "RIGHT TURN"
(B) "LEFT TURN"
(2) Tail and turn signal light
M4N-071, M5N-091, M5N-111