Kubota M4N-071 Operator's Manual page 124

PERIODIC SERVICE
3. Fill with new oil up to the upper notch on the
dipstick.
(See LUBRICANTS, FUEL AND COOLANT on
page 97.)
Oil capacity with filter
IMPORTANT :
• Use DPF-compatible oil (CJ-4) for the
engine.
M4N-071
(1) Oil inlet
(2) Dipstick
M4N-071
(1) Drain plug
118
10.7 L (11.3 U.S.qts.)
(A) Oil level is acceptable within
this range
M5N-091, M5N-111
(1) Oil inlet
(2) Dipstick
M5N-091, M5N-111
(1) Drain plug
2. Replacing engine oil filter
WARNING
To avoid personal injury or death:
• Be sure to stop the engine before replacing the
oil filter cartridge.
• Allow the engine to cool down sufficiently; oil
can be hot and can burn.
1. Remove the oil filter.
2. Put a film of clean engine oil on the rubber seal of
the new filter.
3. Tighten the filter quickly until it contacts the
mounting surface.
Tighten the filter by hand an additional 1/2 turn only.
EVERY 500 HOURS
(A) Oil level is acceptable within
this range
M4N-071, M5N-091, M5N-111