Advertisement
OPERATING INSTRUCTIONS
This appliance is intended for household use only.
The appearance of this appliance may differ from the illustration.
Only use this appliance for its intended purpose as described in this manual.
Do not use attachments not recommended by the manufacturer.
HEAT AND SPEED CONTROL
High temperatures and speed settings are ideal for fast drying or rough drying
before styling; low temperatures and speed settings are ideal for styling and use on
extensions.
OVERHEATING CUT-OFF
This appliance is fitted with a thermostat that will cycle OFF (0) and cut all heat should
the unit exceed the optimum drying level. The unit will continue to blow cold air until the
thermostat resets. If the thermostat continues to cycle turn OFF (0), unplug the appliance
and allow it to cool.
Once cooled, check for and remove any blockages before resuming use.
If problem persists discontinue use and contact our service number.
IONIC TECHNOLOGY
Negative ions produced by this anti-static, IONIC hair appliance nourish and condition
your hair leaving it looking and feeling soft, smooth and shiny. Negative ions also reduce
the size of water droplets on your hair, these smaller droplets evaporate faster reducing
drying time. The ionic function automatically operates when the unit is switched on.
COOL SHOT BUTTON
Once the desired style is achieved, push the Cool Shot button (
a flow of cool air.
SMOOTHING CONCENTRATOR
Channels airflow for smooth, manageable drying. Do not concentrate the airflow on any
one area for an extended period of time. If you desire to dry your hair quickly, remove
the attachment and set the dryer to a high heat and speed setting. Before drying thick
hair with this attachment, use the dryer on the high setting to remove excess moisture.
STYLING
Always towel-dry hair before using a hairdryer. Set the dryer on a high heat/speed
setting and circulate airflow through the hair. Do not concentrate airflow on any one area
for a long period of time. As soon as hair is almost completely dry, lower the heat/speed
setting and use a styling brush to shape the hair.
REMOVABLE END CAP CLEANING INSTRUCTIONS
This dryer is a precision-designed professional tool, it must breathe to operate at peak
efficiency. Always check that the air intake is free from lint, hair and other matter. Do not
attempt this when the dryer is operating or connected to the mains supply.
Turn off the appliance before cleaning the end cap. Hold the end cap at both sides and
rotate it anti-clockwise to remove it from the dryer. Clean with a vacuum or thoroughly
dust off the end cap with a brush and replace it on the dryer. This should be done
regularly.
HANG-UP LOOP
This dryer features a ring allowing it to be conveniently hung on a hook for easy access.
CLEANING
Always unplug the appliance from the mains after use and allow it to cool before
cleaning. Wipe the outer surface of the dryer with a slightly moist cloth, then wipe dry.
STORAGE
Always unplug when not in use.
Allow the appliance to cool before storing. Always store in a dry location. Do not pull or
twist the cord. Do not wrap the cord around the appliance, as this may cause the cord
to wear prematurely and break. Regularly check the power cord for wear and damage
(particularly where it enters the appliance and the plug).
FEATURES
A. Professional rocker switches
B.
3 Heat settings
C. 2 Speed settings
D. Ergonomic handle
E.
Cool shot button
F.
Smoothing concentrator
G. Removable end cap
H. Hanging ring
F
) to set the style with
E
D
G
B
A
C
H
Advertisement
