Operation - NJD Electronics SPECTRE User Manual

User Guide Spectre

Operation

The Spectre is a floodlight, and does not produce a focused beam
of light. Aim the lantern in order to get the best illumination. The
barn doors may be used to control light spill at the edges of the
area to be illuminated, but should be used with care, as multiple-
coloured shadows will result when more than one lamp is
illuminated.
The Spectre must not be operated with the barn doors completely
closed, as this will result in an obstruction to the ventilation
system, and will overheat the barn doors.
Do not place coloured gels in front of the Spectre. The dichroic
filters must not be replaced by colour gels.
It is recommended that all four barn-doors are closed when the
product is to be transported, in order to protect the dichroic
filters, which are expensive to replace.
The fan is operated by a temperature sensing circuit, and
switches on when the temperature exceeds 50°C and off when it
falls below 40°C
Control
For DMX operation see page 6
For operation from the SFC1 DMX remote controller see
page 9
For Chroma HX emulation see page 13
(Use Chroma HX emulation if running from an IQ-MX80 or IQ-
MX60 controller)
For MIDI operation see page 9
For 0-10V analogue operation see page 12
© N.J.D. Electronics 1998 -Page 5-