Technical Specification - NJD Electronics SPECTRE User Manual

User Guide

Technical Specification.

Dimensions:
Weight:
Lamps:
Lamp Life:
Colours:
Power Supply:
Power:
Current:
Power factor:
Switch-on Surge:
Beam spread:
Beam intensity:
DMX input/output:
Connectors:
Analogue input voltage:
Analogue input impedance:
Analogue connector:
Channel 1:
Channel 2:
Channel 3:
Channel 4:
0V (ground):
The Spectre complies with Electrical Safety Standard EN60598
Parts 1 and 2-17 (1997), and Electromagnetic Compatibility
Standard EN55015.
© N.J.D. Electronics 1998
pin 3
pin 5
pin 4
pin 1
pin 2
Standards
250mm x 250mm x 245mm
5.2kg
3 x A1/244 (230V 500W)
50 hours at 240V AC
100 hours at 230V AC
Red:
Green:
Blue:
and all intermediate shades
230V AC 50Hz
1500W (all lamps illuminated)
6.5A rms. (all lamps illuminated)
cos f = 1.000
(The Spectre is a resistive load)
30 Amps for 60ms
(all three lamps switched at the same
time, 0.4W mains source impedance)
56° (to 50% brightness).
(1m wide at 1m distance)
2200 candela per channel.
complies with
DMX512 (1990) 4µsec protocol
5-pin XLR
Data+:
Data-:
Earth:
+12V supply: Pin 5
0-10V
44kW
7-pin DIN
(0.700,0.296)
(0.246,0.686)
(0.128,0.153)
Pin 3
Pin 2
Pin 1
Spectre
-Page 15-