Selecting Operation Mode - D-Link DVG-N5402SP Quick Installation Manual

DVG-N5402SP Quick Installation Guide

Selecting Operation Mode

In order to connect your device to a wired ISP, on the Device mode page,
from the Connection method list, select the Wired connection value. In
this mode you can configure a WAN connection, set your own settings for the
wireless network, configure LAN ports to connect an STB or VoIP phone, and
set your own password for access to the web-based interface of the device.
In order to connect your device to a wireless ISP (WISP), on the Device
mode page, from the Connection method list, select the Wi-Fi value. In
this mode you can connect your device to another access point, configure a
WAN connection, set your own settings for the wireless network, configure
LAN ports to connect an STB or VoIP phone, and set your own password for
access to the web-based interface of the device.
When the operation mode is selected, click the NEXT button.
17