Lorex E893AB Series Quick Start Manual page 14

IMPORTANT!
Before Installing
• Test your camera prior to selecting a
permanent mounting location by
temporarily connecting the camera
and cable to your NVR.
• Review "Important installation guidelines"
pg.4 before choosing a permanent
mounting location.
• Decide whether to run the cables through
the wall/ceiling (drilling required) or along
the wall/ceiling. If you run the cables
along the wall/ceiling, you must run the
cable through the cable notch located on
the base (see Figure 1). This will keep the
camera base flush to the surface when
mounted.
Figure 1
Cable notch
10