Reboot The Profusion Io; Check Cable Connections - MOOD PROFUSION iO Networking Manual

NETWORKING BASICS

REBOOT THE PROFUSION IO

While the player is on, press the STANDBY button on the remote control (or from the online control
1.
panel) and allow the device to enter "standby" mode. The POWER indicator light should turn red.
Push the ON/OFF button on the back of the player to fully power down the player.
2.
Remove the power cable from the back of the player for 30 seconds.
3.
Re-insert the power cable into the back of the player.
4.
Press the ON/OFF button on the back of the player into the ON position.
5.
The player should initialize for several stages and resume music playback
6.
Your ProFusion iH needs to remain on at all times in order for it to successfully connect for updates.

CHECK CABLE CONNECTIONS

1. Confirm that the Ethernet (CAT5) cable is securely connected to the SYMBOL port on the back of the
player.
2. Confirm that the other end of the Ethernet (CAT5) cable is connected to the appropriate port on your
network equipment (router or switch).
Not sure where to connect to your network equipment? Consult your IT professional or Internet Service
Provider for assistance.
3. Confirm that the SYMBOL network light on the front of the player is illuminated.
MOOD:
Rev. 3/26/2021 Page | 3