>>>
SETTINGS
Language
> US
The text of the touchscreen images can be
displayed in various languages.
Calling up language selection
The following button allows selection of
various different languages.
9026
> Push the button
The language selection appears.
9020
In the language selection, the available
languages are shown in a list which ex-
tends over several pages. Each list area is a
contact surface. The individual contact
surfaces are marked with the language des-
ignation and the associated national flag.
71
Turn the page
These buttons
ing in the direction shown by the arrow
through the pages of the list.
The current page of the list and the total
number of pages is shown between the
buttons.
Selecting the language
If you change the language, the software
restarts.
.
Language
> Push the contact area of the desired lan-
guage.
For safety reasons, the selection is called
up again using the signal
> In order to accept the selected language,
push the button
> In order not to accept the selected lan-
guage, push the button
Canceling the language selection
The language selection is closed by push-
ing the button
then appears.
7006
allow page turn-
.
Set language to
.
.
, and the setting menu
Moodlight
Using this button, the light bars on the
side can be switched on, switched to red or
blue, or switched off completely.
9029
9028
> Push the button
Mood light
The light bars are controlled accordingly.
WARNING
Deactivate the Becker moodlights while
driving in your vehicle in order to pre-
vent visual distraction from the road and
traffic.
9031
.