Adjusting The Volume; Setting The Radio Stations Manually - Silvercrest HG00708A Operation And Safety Notes

To switch on the device, press the / FM / AM button .
11
To switch off the device, press the / FM / AM button for approx.
11
2 seconds.
Note: To switch between AM and FM, press the / FM / AM
11
briefing.

Adjusting the volume

Set the desired volume using the VOL + / MIN -button or VOL - /
6
HR -button .
5
The volume can be adjusted in a range of 00 to 16. The adjusted
volume level is indicated for about 3 seconds in the display, then the
display will change for about 3 seconds to the frequency display
and then back to the time.

Setting the radio stations manually

To set the desired frequency range, press the / FM / AM button
briefly. When VHF has been received, a dot (FM) appears on
11
the display , when AM has been received a dot (AM).
1
To fine tune the frequency, press the DOWN / AL1 button or the
12
UP / AL2 button briefing.
13
Note: The frequency is set in 0.05-MHz stages when VHF is being
received. At a frequency of 0.05 MHz (i.e. 99.25 MHz), a dot
(0.05) appears on the display on the right.
Note: The speaker
is switched off during the search for radio
14
stations, the frequency of the radio station is shown on the display .
1
16 GB/IE