Troubleshooting; Error Messages - Hamilton Beach 58928-CE Operation Manual - Original Instructions

Troubleshooting

Error Messages

All Program Buttons are flashing.
• The motor has overheated during use. Turn RESET/OFF (I/ )
(Power) Switch to OFF ( ) and allow to cool for 15 minutes.
Flip RESET/OFF (I/ ) (Power) Switch to RESET (I), and resume
normal operation.
The SMOOTHIE ( ) and ICE CRUSH (
• Remove the Blender Jar and Lid. Stir contents. Replace Lid.
Press HOT SOUP ( ) Button. If the problem persists, turn unit
off, unplug from electrical socket, and contact the customer
service center.
The HOT SOUP ( ) and WHOLE JUICE (
flashing.
• The Blender speed has ramped up to high too quickly and
run on high speed. Turn the unit off, unplug from the electrical
socket, and call the customer service center.
Blender is plugged in and switch is in ON (I) position, but panel
lights are not illuminated.
• Blender enters standby mode after 3 minutes of inactivity to
conserve power. Press any control panel button or switch to
resume normal operation.
NOTE: Buttons start flashing 10 seconds after a problem
has occurred.
) Buttons are flashing.
) Buttons are
15