Using Your Baumatic Cooker Hood - Baumatic STD6SS User Manual

To use your cooker hood:
1) Make sure it has been properly installed.
2) Find the CONTROL PANEL. It is located on the hood's front
surface near the upper right corner of the unit.
3) The CONTROL PANEL contains switches as shown in the Figure below.
These perform separate functions. You will need to understand what
both switches do before you attempt to use your cooker hood.
* Note: The hood should be switched on at least as soon as you start
cooking.
Your Cooker
Hood's
Control Panel
MOTOR ON /OFF switch – the '
on and off and adjusts its speed. There are three speeds, pushing the switch to
the right increases the speeds.
Motor Operation Pilot light - 'B' in the figure above.
LIGHT ON/OFF switch - Pressing the '
cooker hood's light on and off.
PLEASE NOTE THAT YOUR BAUMATIC COOKER HOOD CAN BE
USED EITHER IN RECIRCULATION MODE OR IN EXTRACTION
MODE. TO USE IN RE-CIRCULATION MODE, YOU WILL NEED TO
FIT THE CARBON FILTER.
7

Using your Baumatic Cooker Hood:

' switch ('A' in figure above) turns the motor
' switch ('C' in figure above) turns your