Baumatic STD6SS User Manual page 11

Maintenance – Changing the Light Bulb and Carbon Filter
a) Changing the light bulb
Before changing the light bulb, ensure that the appliance is not
live (i.e., ensure that you have switched it off at the omni-polar switch on
the wall switch plate.).
Open the grease filter support grille (see previous page).
Find the bulb in its position.
Change the bulb using only olive-shaped spares with an E14
coupling, max. 40W.
* PLEASE NOTE - Defective bulbs should be replaced
immediately.
Replace the grease filter support grille.
10