Memory Backup - Sony DSX-MS60 Operating Instructions Manual

Fm/am digital media player
Hide thumbs Also See for DSX-MS60:
Table of Contents

Advertisement

Available languages

Available languages

CLOCK-ADJ (Clock Adjust) (page 6)
CT (Clock Time)
Activates the CT function: "ON," "OFF"
(page 13, 14).
BEEP
Activates the beep sound: "ON," "OFF."
AUX-A*
1
(AUX Audio)
Activates the AUX source display: "ON,"
"OFF" (page 21).
AUTO OFF
Shuts off automatically after a desired time
when the unit is turned off: "NO," "30S
(Seconds)," "30M (Minutes)," "60M (Minutes)."
SUB/REAR*
1
Switches the audio output: "SUB-OUT"
(subwoofer), "REAR-OUT" (power amplifier).
DEMO (Demonstration)
Activates the demonstration: "ON," "OFF."
DIMMER
Changes the display brightness.
– "AT": to dim the display automatically when
you turn lights on. (Available only when the
illumination control lead is connected.)
– "ON": to dim the display.
– "OFF": deactivate the dimmer.
CONTRAST
Adjusts the contrast for a clear view of the
display, suitable for the installed viewing angle.
The contrast level is adjustable in 7 steps.
LV-METER (Level Meter)
Activates the level meter: "ON," "OFF."
A.SCRL (Auto Scroll)
Scrolls long items automatically: "ON," "OFF."
REPEAT (page 16, 18)
LOCAL (Local Seek Mode)
– "ON": to only tune into stations with stronger
signals.
– "OFF": to tune normal reception.
MONO*
2
(Monaural Mode)
Selects monaural reception mode to improve
poor FM reception: "ON," "OFF."
ZAP.TIME (Zappin Time)
Selects the playback time for the ZAPPIN
function.
– "ZAP.TIME-1 (about 6 seconds),"
"ZAP.TIME-2 (about 15 seconds),"
"ZAP.TIME-3 (about 30 seconds)."
LPF*
3
(Low Pass Filter)
Selects the subwoofer cut-off frequency: "OFF,"
"80Hz," "100Hz," "120Hz," "140Hz," "160Hz."
SUB*
3
(Subwoofer Phase)
Selects the subwoofer phase: "NORM," "REV."
20
HPF (High Pass Filter)
Selects the front/rear speaker cut-off frequency:
"OFF," "80Hz," "100Hz," "120Hz," "140Hz,"
"160Hz."
LOUD (Loudness)
Reinforces bass and treble for clear sound at low
volume levels: "ON," "OFF."
DM+
Activates the DM+ function: "ON," "OFF."
BTM (page 12)
*1 When the unit is turned off.
*2 When FM is received.
*3 When the audio output is set to "SUB-OUT."

Memory backup

Your last settings are stored automatically.
Sound settings (except volume), setup items
(except clock) and tuner presets are stored in the
internal memory of the unit.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents