Table of Contents
Advertisement
When you are ready to install the 45º box you will need to mark and notch out the endplate, then drill a hole
through the box to allow insertion of the knuckle override shaft to locate into the motor.
Secure the knuckle to the box with the fixings provided.
Notch the endplate
ATTACH THE CORRECT MANUAL OVERRIDE CRANKING DIRECTIONAL ARROW LABELS TO
!
THE 45 DEGREE BOX OR DOOR GUIDE (IF HALF BOX FITTED).
INSTALLATION OF CURTAIN INTO GUIDES AND FITTING OF STOPS
12
INSTALLING THE MANUAL OVERRIDE
Drill the box
Secure the Knuckle
1. Cover the barrel and rings with the protective bubble wrap from
the curtain.
2. Lift coiled curtain up level with axle (requires 2 people) and feed
the safety edge terminal block over the barrel, then feed the
bottom of the curtain over the barrel into guide.
3. Slowly unroll curtain and gently lower down to floor. NB Do not
allow the curtain to free fall over the axle as this will result in
damage to the curtain.
If a 45º box is not
fitted, secure the
knuckle to the
endplate flange.
Correct motor position 45°
over-ride position for Somfy
Advertisement
Table of Contents
