Additional Rollixo Set Up And Connecting Additional Devices - Garage Door Systems ThermaRoll 55 Installation Instructions Manual

The optional 45° cover is installed once
motor limit setting is complete. The 45°
box hooks into the 90° box along the join.
To fit the knuckle override, mark and notch
out the endplate, then drill a hole through
the box to allow insertion of the knuckle
override shaft to locate into the motor.
Fit the 45º box and fix in place using
self drilling screws supplied, locate the
override shaft into the motor and secure
the knuckle to the box with the fixings
provided.
If a 45º box is not fitted, secure the
knuckle to the endplate flanges.
SOMFY ROLLIXO QUICK COMMISSIONING
Pairing Keygo RTS keyfob's (supplied paired)
Press the 'Prog' button on the Rollixo RTS front panel until the LED above the Prog button
lights up RED.
Press the button on the Keygo RTS keyfob that you want to control the Rollixo RTS controller
with until the 'Prog' LED on the Rollixo RTS controller flashes and then goes out.
20
FITTING THE 45º COVER
e
Notch the endplate
1 2 3 4
STOP
Prog
1 2 3
STOP
Drill the box
1
STOP
4
Prog STOP
Secure the Knuckle If a 45º box is not
fitted, secure the
knuckle to the
endplate flange.
2 3 4
Prog
1 2 3 4
Prog