Commissioning And Setting Somfy Motor Limits - Garage Door Systems ThermaRoll 55 Installation Instructions Manual

SOMFY ROLLIXO QUICK COMMISSIONING
Motor limit setting
During the limit setting procedure, the Rollixo push button controls are in HOLD TO RUN mode.
Motor limit directions as viewed from back of door
Motor limit directions as shutter box projects towards you.
Left hand motor
installation
Yellow button
Open / Up Top limit
Fine tuning the bottom limit
2
Press and hold the DOWN
button to move the door to the
desired 'bottom limit' position
(use the UP & Down
buttons to fine tune the door to
the desired position).
Press the motor 'bottom limit' button IN to
3
release out to set the 'bottom limit' posi-
tion (see diagrams to the right). To check,
run the door up 200-300mm and return to
check 'bottom limit' has been accepted.
Setting the top limit
4
Press and hold the UP
button to move the door to
the top limit position (use
the UP & Down
buttons to fine tune the door
to the desired position).
Press the 'top limit' button in, ensur-
5
ing the limit button is fully out, to set
the 'top limit' position (see diagrams to
right). To check, run the door down 200-
300mm and return to check 'top limit'
has been accepted.
Briefly press the PROG button until the
6
door jogs to complete the motor set up
procedure
The motor & safety brake LED goes out.
White button Yellow button
Bottom limit Close / Down Close / Down Bottom limit
1
STOP
Left hand motor
1 2 3 4
STOP
IMPORTANT: at the top limit position the bottom lath should
be completely within the guide.
Left hand motor
Prog
Right hand motor
White button
Open / Up
Top limit
2 3 4
Prog
Right hand motor
Prog
Right hand motor
installation
1 2 3 4
19