CITROEN C-Crosser Owner's Handbook Manual page 35

SERVICE INDICATOR
System which informs the driver when
the next service is due in accordance
with the manufacturer's
schedule.
The point at which the next service is
due is calculated from the last service
indicator zero reset.
It is determined by two parameters:
- the distance travelled (in miles (km)),
- the time elapsed since the last ser-
vice (in months).
The distance remaining to be travelled
may be weighted by the time factor,
depending on the user's driving habits.
Operation
When the ignition is switched on, you
must press the INFO button several
times in succession until the service
indicator is displayed. The distance
recorder display line indicates
number of miles (kilometres) remaining
and the time elapsed line indicates the
number of months remaining before the
next service is due.
M O N I T O R I N G
Example: the display indicates that
7 300 miles (kilometres) remain before
the next service is due.
servicing
The symbol "--" remains displayed
until the fi rst service of a new vehicle
has been carried out.
Service overdue
Each time the ignition is switched on,
the display "PERIODIC INSPECTION"
is displayed for a few seconds to
indicate that the service must be carried
out without delay.
the
Example: the display indicates that the
service is overdue. This service must
be carried out by a CITROËN dealer or
a qualifi ed workshop.
https://www.automotive-manuals.net/
Resetting the service indicator
to zero
Your CITROËN dealer or a qualifi ed
workshop carries out this operation
after each service.
If you have carried out your vehicle's
service yourself, the
procedure is the following:
switch off the ignition.
press the INFO button several times
in succession until the service indi-
cator is displayed.
press and hold the INFO button for
a few seconds until the spanner
fl ashes .
press the INFO button while the
spanner is fl ashing to change the dis-
play "---" to "CLEAR" then the time
remaining before the next service is
due is displayed.
After a certain distance and a certain
time, the display of "---" is reinitialised
and the display indicates the time
remaining before the next service is
due.
I
zero reset
33