CITROEN C-Crosser Owner's Handbook Manual page 34

DISTANCE RECORDERS (A/B)
I
System for measuring the total distance
travelled by the vehicle during its
service life and the distance travelled in
a day or other period until it is reset to
zero by the driver.
The total
displayed in zone 1 of
the screen and the trip
distance in zone 2 .
Zero reset
With the ignition on, press the INFO
button for more than 2 seconds until
zeros appear.
32
M O N I T O R I N G
COOLANT TEMPERATURE
distance is
If the bar is close to the critical position
located on the right, the temperature is
too high.
The symbol fl ashes when your engine
is overheating.
You must stop your vehicle as soon
as it is safe to do so.
Wait a few minutes before switching
off the engine.
Wait for the engine to cool before
!
topping up the level. The cooling
system is pressurised.
To avoid any risk of scalding, unscrew
the cap by two turns to allow the
pressure to drop.
When the
remove the cap and top up the level, if
necessary.
Contact a
qualifi ed workshop.
https://www.automotive-manuals.net/
When the engine is
running, this indicates
the temperature of the
coolant.
pressure has dropped,
CITROËN dealer or a
RANGE
When the engine is
running , this indicates
the distance which can
still be travelled with the
fuel remaining in the tank
based on the average
fuel consumption over
the last
kilometres travelled.
When the range is less than 30 miles
(50 km) , dashes are displayed.
Refuel as soon as possible. The display
of the range is updated.
This fi gure may increase following a
change in the style of driving or the
relief, resulting in a reduction in the
current fuel consumption.
If you only add a few litres, the
value displayed will be incorrect.
Therefore, you must fi ll the tank
whenever possible.
When you disconnect
!
battery, the previous
consumption data is lost and the
value displayed will be different from
that displayed before the battery was
disconnected. The distance displayed
must be considered an approximate
indication.
few miles/
the
fuel