Advertisement
Modifi cation of the detection zones
Press button A to deactivate the
system.
Press button A again for a few seconds
and release it.
The detection zone modifi cation information
is indicated by an audible signal:
-
double signal on vehicles fi tted with
a towbar,
-
single signal on vehicles which are
not fi tted with a towbar.
VII
124
D R I V I N G
Deactivation
With reverse gear engaged, press
button A , the indicator lamp goes
off, the system is fully deactivated.
Reactivation
With reverse gear engaged, press
button A again, the indicator lamp
comes on, the system is reactivated.
Operating fault
If an operating fault occurs, the indicator
lamp in button A fl ashes when reverse
gear is engaged.
Contact a CITROËN dealer or a qualifi ed
workshop.
In bad weather or in winter, check
that the sensors are not covered with
mud, ice or snow.
https://www.automotive-manuals.net/
REVERSING CAMERA
Linked with the navigation option, a
reversing camera is activated automati-
cally when reverse gear is engaged.
The colour image is provided on the naviga-
tion screen with indication of the limit of the
rear bumper and of the general direction of
the vehicle.
The red line indicates the distance re-
quired to open the lower tailgate.
Advertisement
