CITROEN C-Crosser Owner's Handbook Manual page 171

RADIO
Selecting radio mode
Press the "PWR" button
or the "AM/FM" button to
switch on the radio.
Selecting the waveband
Press the "AM/FM" button
several times in succession
to select the waveband; it
changes in the following
order: FM1/FM2/FM3/MW/
LW/FM1...
Automatic station search
Press the "SEEK
"SEEK " button to search
the lower frequencies or the
higher frequencies respec-
tively.
The search begins automatically and
stops at the fi rst station found.
A U D I O a n d T E L E M A T I C S
Manual station search
Turn the "TUNE" dial re-
spectively
search the lower frequen-
cies or to the right to search
the higher frequencies.
Manual station storing
You can store up to six stations on each
waveband.
Storing a new station replaces the pre-
vious station.
Press one of the six buttons "1" to "6"
until an audible signal is heard.
" or
The sound cuts out then becomes au-
dible again when the station has been
stored.
The number of the button and the as-
sociated radio frequency appear on the
screen.
To recall the pre-set stored setting,
press the button and release it within
two seconds.
https://www.automotive-manuals.net/
Automatic station storing
Stations can only be stored automati-
to the left to cally on wavebands FM3, MW and LW.
Storing new stations replaces the pre-
vious stations.
This storing can be activated automatically
irrespective of the waveband selected.
The six stations offering the best recep-
tion are stored and classifi ed from the
weakest to the strongest on the six cor-
responding buttons.
Recalling stored stations
Press one of the six buttons "1" to "6".
The station corresponding to the wave-
band selected appears on the screen.
Disconnecting the battery terminals
clears the stored radio stations.
Press the "AM/FM" button
for more than two seconds.
XI
169