Huawei FusionCol8000-E240 User Manual page 82

FusionCol8000-E240 Modular Indirect Evaporative
Cooling System
User Manual
Figure 4-10 Drainpipe routing (end pipe routing)
Figure 4-11 Drainpipe routing (bottom pipe routing)
Sealing
1.
2.
Issue 01 (2021-01-30)
NO TE
● The water pipes are connected using thread connectors. The threaded joints must be
sealed with sealing tape or thread adhesive.
● When connecting water pipes, use appropriate active connectors and secure them using
a wrench.
● The drainpipe must be wrapped with thermal insulation foam (including the buried
pipe) with a thickness of at least 3 cm.
Remove the paper protective film from the sealing putty.
Seal the gaps between the water pipes and the devices using sealing putty
after the pipes are correctly connected.
Copyright © Huawei Technologies Co., Ltd.
4 System Installation (FDC Scenario)
73