Table of Contents
Advertisement
o When the Child Lock light is switched on, the only button/dial
that will operate is the POWER button. If you turn the washing
machine off using the POWER button, the child lock option will be
cancelled.
o To change the wash cycle when the child lock is engaged, press
the TIME SAVE and TIME DELAY buttons simultaneously, then
press the START/PAUSE button.
o Use the wash program selection knob to select the program that
you want to use and then press the START/PAUSE button again
to start the wash cycle.
Maintenance and cleaning
In daily use
o Once a wash cycle has completed, you should pull out the
detergent drawer slightly, so it can dry out.
o Leave the porthole door ajar for a short while after a wash cycle
has completed. This should help to prevent stagnant smells and
to protect the door seal.
o Close the water tap.
o We suggest that you disconnect the appliance from your mains
supply, when it is not in use.
Control panel and washing machine cabinet.
IMPORTANT: Do not use any abrasive cleaner or household polish on
either the control panel or operating parts.
o Wipe over the control panel and the external surface of the
machine using a brand new damp cloth with warm water.
o If you ever spill any liquid detergent or conditioner from the
detergent drawer onto the washing machine cabinet, then these
should be cleaned up immediately as they could be corrosive.
28
Advertisement
Table of Contents
