Epson SureColor P Series Quick Reference page 34

Make sure the replacement cartridge is the correct color and remove it from its package. Gently shake
6.
the cartridge for about 5 seconds before installing it, but be careful not to touch the chip on the
cartridge.
Hold the cartridge with the arrow pointing toward the printer. Then insert the cartridge into the slot
7.
until it clicks into place. Don't force it in.
Caution: Do not remove and re-insert cartridges more often than necessary. Doing so can compromise the
needle valve seal and allow air to enter the ink tubes, causing nozzle damage.
Note: If the ink cartridges are not used on a frequent basis, it is recommended that you remove the
cartridges every 3 months, shake them for 10 seconds, and re-insert them.
Replacing ink cartridges |
33