Factory Reset - DaytonAudio DAX88 User Manual

Factory Reset

A factory reset of your DAX88 can be performed with the Dayton Audio Matrio
Factory reset will erase any Wi-Fi settings, custom input names, custom zone names,
and custom DAX88 unit names. If you have multiple DAX88 units on your network, only
the currently selected DAX88 unit will be reset.
1) Open the Matrio
2) Open the Settings menu by pressing the gear icon in the top right corner of your
screen.
3) If you have multiple DAX88 units on your network, make sure to select the
correct unit that you are trying to factory reset by selecting the DAX88 name in
the top of your screen and selecting the correct unit from the list. While in the
settings menu, any changes made to settings or factory reset will ONLY affect
one unit at a time.
4) Press the Factory Reset button, and then press reset when you are sure you
want to reset your unit.
5) You will see a message that says your DAX88 has been reset. If you only had
the single unit on your network, the app will close. If you have an additional unit
on the network, the app will continue to work with the other unit.
After a factory reset, it will take a few minutes for your device to work normally again.
Please allow three minutes after pressing factory reset before resuming usage of your
DAX88 or removing power. If your DAX88 is connected to the network via a wired
ethernet connection, the Matrio
TM app on your iOS or Android device
app will eventually find the unit again and display it in
TM
TM app.
Page | 38