Summary of Contents for Dostmann Electronic P4000 Series
Page 1
P4000 / P4005 / P4010 / P4015 Präzisionshandmessgerät für Temperatur mit USB-Schnittstelle Precision hand-held measuring instrument für temperature with USB-interface 5000-4000 / 5000-4005 / 5000-4010 / 5000-4015 Bedienungsanleitung Operating Instruction www.dostmann-electronic.de...
Page 2
Fig. A Fig. D Fig. E Fig. B Offset aktiv Kanal 1 Offset aktiv Kanal 2 Offset active Offset active channel 2 channel 1 Fig. F Fig. C Messwertspeicher Measurements memory...
Page 3
Inhaltsverzeichnis 1. Einleitung Sehr geehrte Kundin, sehr geehrter Kunde, 1. Einleitung herzlichen Dank für den Kauf dieses Produktes. Vor Inbetriebnahme 2. Hinweise / Bitte beachten lesen Sie bitte die Betriebsanleitung sorgfältig durch. So erhalten Sie wertvolle Informationen und machen sich im Umgang mit dem 3.
Page 4
Das Messgerät verfügt über einen USB-Anschluss mit Mini-USB-Buchse. 5.2 Inbetriebnahme des Gerätes Durch unsere optionale Windows Software DE-Graph (Best.Nr. 5090- Zur Inbetriebnahme das Messgerät aus der Verpackung entnehmen und 0081) können die Messwerte in Verbindung eines PCs aufgezeichnet die Displayschutzfolie entfernen. Vor dem Einschalten den Messfühler werden. Durch die USB-Schnittstelle wird das Gerät auch mit in die dafür vorgesehene Buchse auf der unteren Seite des Mess- Spannung versorgt. Das Produkt ist ausschließlich für den oben instrumentes anstecken und sicherstellen das zwei volle 1,5V-Batterien...
Page 5
Bei Messgeräten mit zwei Kanälen (P4005/P4015) springt das 5.4.6 Messkanal 2 Ab- oder Anschalten (nur P4005/P4015) Messgerät nach Eingabe des ersten Korrekturwertes in Displayzeile Der Messkanal 2 (Displayzeile 2) kann deaktiviert bzw. aktiviert 2 zur Eingabe eines zweiten Korrekturwertes (für Messkanal 2). werden. Dazu ist beim Einschalten die MODE-Taste und die Sobald ein Korrekturwert (Offset) im Messgerät eingegeben wurde, ON/OFF-Taste solange gedrückt halten bis ein Messwert erscheint. erscheint im Display in der Statuszeile ein kleine o bzw. zwei kleine oo (bei Korrektur von beiden Kanälen nur P4005/P4015).
Page 6
5.6 Batteriewechsel / Batterie-Status-Anzeige 7. Zeichenerklärung Batteriedeckel auf der Rückseite öffnen.Leere Batterien entnehmen Mit diesem Zeichen bestätigen wir, dass das Produkt den in und zwei neue Batterien 1,5 Volt AA size einlegen. Fig. C den EG Richtlinien festgelegten Anforderungen entspricht und den festgelegten Prüfverfahren unterzogen wurde. Sobald die Batteriespannung abfällt, zeigt das Messgerät das Batte- riesymbol an.
Page 7
• Calibration report Battery replacement / Battery status indication • Battery 2x AA size 1,5 Volt (already inserted) 6. Technical data 7. Explanation of symbol 4. Usage 8. Waste disposal The instruments of P4000 series are suitable for temperature Storage and cleaning measurements with an external sensor. Areas of application depends on the probe (the probe is not included with the instrument): • Air (gasiform media) • Water or similar media (liquids) • Semisolid media (with penetrationprobe) • Surface...
Page 8
The instrument has a built-in Mini-USB-Port. Through our optional 5.2 Start-up device DE-Graph Windows Software (Order Code 5090-0081) it is possible to For operation take out the instrument from the packaging, remove the transfer the measurement to a PC (online documentation). By a USB display foil. Before switching on the instrument connect the probe/s to connection the instrument will be power supplied, too. This product is the instrument and check the batteries (2 x 1,5V AA size) whether they exclusively intended for the field of application described above.
In case of having a 2-channel instrument (P4005 / P4015) the 5.4.6 Measuring channel 2 on/off switching (P4005/P4015 only) instrument switches into the second display line (for channel 2) after For switching on/off the second channel (bottom line) push during entering the first correction value . switching on the MODE-button and ON/OFF-button until measurements appear. If an offset value has been used a small “o” appears in the status line, if offset values has been used for both channel “oo” appears in 5.4.7 Display differential temperature (P4005/P4015 only) the status line.
Page 10
5.6 Battery replacement / Battery status indication 7. Explanation of symbols For the power supply of the instrument two 1,5 Volt battery (AA size) This sign certifies that the product meets the requirements are used. To exchange the batteries switch off the instrument and of the EEC directive and has been tested according to the open the battery cover on the back of the instrument. Replace the specified test methods. used batteries with new ones. 8.
Need help?
Do you have a question about the P4000 Series and is the answer not in the manual?
Questions and answers