Advertisement
10
Installation Instructions
3. Connect the HOT inlet hose to the HOT
water supply
and the COLD
inlet hose to the
COLD water sup-
ply. Tighten by
hand until snug.
Then tighten
each
supply connec-
tion another 2/3
turn with pliers.
Do not bend,
kink or pinch
water inlet
hoses.
4. Turn on the water
and check for leaks.
Connecting drain and
electrical
1. Snap one end of the drain hose hanger
(shipped in washer drum) onto the drain
hose. Continue wrapping it around the
hanger and snap it in place.
2. Place the hook end of the drain hose in
the drain opening. Secure the drain hose
with the cable tie (provided in the enclo-
sure package) to the standpipe, inlet hose,
laundry tub, etc. so the hose does not pull
out from the force of the water.
Cable Tie
IMPORTANT
Check to ensure the power is off at a circuit
breaker/fuse box before plugging the power
cord into an outlet.
3. Plug the power cord into a grounded outlet.
Grounding type wall receptacle
Do not, under
any circumstances,
cut, remove,
or bypass the
grounding prong.
Power cord with
3-prong grounded plug
Advertisement
