Page 1
INSTALLATION MANUAL RKK SERIES - KIT CAMERA / NVR POE Page: 1 Page: 1 POE IP Kit Plug & Play IP cameras and NVR Installation manual How to install the system How networking How to insert an additional camera DSE SRL - ITALY - WWW.DSE.EU...
Contents of this handbook The POE kit RKK series are designed to make small video surveillance systems rows ready to operate in minutes and can be installed without any specific knowledge. This manual explains how to install cameras and video recorder, how to make the basic adjustments and how to connect to computers on the internal network.
INSTALLATION MANUAL RKK SERIES - KIT CAMERA / NVR POE Page: 3 Page: 3 Package Contents The kit you have purchased is a complete video surveillance system. The package includes: 1 - Video Recorder (NVR) 2 - 1 to 8 POE IP CAMERA FOR INDOOR / OUTDOOR...
INSTALLATION MANUAL RKK SERIES - KIT CAMERA / NVR POE Page: 4 Page: 4 Connect the cameras The cameras of this system are designed to not require any configuration. You just connect the camera to one of the POE NVR network ports.
INSTALLATION MANUAL RKK SERIES - KIT CAMERA / NVR POE Page: 6 Page: 6 Install the Hard Disk If you want your system to record, you must install a hard drive inside the VCR. Any of the SATA hard drives for computers 3.5 ", but for a longer life would agree to purchase an appropriate model for video recording.
INSTALLATION MANUAL RKK SERIES - KIT CAMERA / NVR POE Page: 7 Page: 7 Connect the NVR The central unit of your system is a network video recorder with POE ports, which apparatus is also called NVR. To use it you have to make some connections on the back.
Page 8
INSTALLATION MANUAL RKK SERIES - KIT CAMERA / NVR POE Page: 8 Page: 8 A-OUT - AUDIO / HEADPHONES This is an audio output for speakers or headphones with a 3.5 mm stereo jack. If you have purchased the cameras with audio you can hear from this exit.
Page 9
INSTALLATION MANUAL RKK SERIES - KIT CAMERA / NVR POE Page: 9 Page: 9 The camera power supply, supplied with the DVR, is connected to the DC12V connector on the back of the NVR. Just plugged the plug the NVR will turn on and you will see an image appear on the monitor. If you do not see anything appear checks the connection to the monitor.
INSTALLATION MANUAL RKK SERIES - KIT CAMERA / NVR POE Page: 10 Page: 10 Make first power Just connect the adapter plug, the NVR starts up and displays an image on the screen. If you do not see the picture you have to check the cable and the monitor settings.
Page 11
INSTALLATION MANUAL RKK SERIES - KIT CAMERA / NVR POE Page: 11 Page: 11 3 - MAKE THE GENERAL OPTIONS In the first section of the wizard you set general system options: LANGUAGE - Select the menu language RECORDING MODE - Select OVERWRITE to overwrite the oldest files once run out of space on HDD DAYS HELD - Set if you want, a video archive capacity limit due to privacy requirements.
INSTALLATION MANUAL RKK SERIES - KIT CAMERA / NVR POE Page: 12 Page: 12 If you already connected the NVR cameras, you will find here the list of cameras that have connected. Check that the green dot certifying the connection was successful. If you have not connected the cameras there is this empty list. Remember that auto-configuration will only work with IP cameras of our Series RK.
Page 13
INSTALLATION MANUAL RKK SERIES - KIT CAMERA / NVR POE Page: 13 Page: 13 Review the records To review the records kept by your NVR do the following. 1 - OPEN WINDOW PLAYBACK Click the right mouse button and choose in the context menu PLAY 2 - CHOOSE DAY AND TIME YOU WANT TO REVISE Select at the top right on the day you're interested in.
Page 14
INSTALLATION MANUAL RKK SERIES - KIT CAMERA / NVR POE Page: 14 Page: 14 Click where you want the timeline to play back at that exact moment. With the buttons 24H 6H 2H 1H 30M can vary the scale of the timeline.
Page 15
INSTALLATION MANUAL RKK SERIES - KIT CAMERA / NVR POE Page: 15 Page: 15 Connect the NVR to your network For you can connect to the surveillance system via PC or mobile you must connect the NVR to your network. To do this using a network cable and connect the door EXTERNAL NETWORK called NET, or WAN NVR to a free port on your router or switch.
Page 16
INSTALLATION MANUAL RKK SERIES - KIT CAMERA / NVR POE Page: 16 Page: 16 Check the network parameters of your Your NVR is configured on the network automatically (DHCP), then you receive directly address and network configuration from your router. You need not worry to enter any parameters. However, before you connect remotely with PC and mobile it is to verify the network situation.
Page 17
INSTALLATION MANUAL RKK SERIES - KIT CAMERA / NVR POE Page: 17 Page: 17 In this window verify that the check on both DHCP active and get the IP address your NVR has assumed within the network is the top entry (in the example 192.168.2.168.
Page 18
INSTALLATION MANUAL RKK SERIES - KIT CAMERA / NVR POE Page: 18 Page: 18 This page checks the P2P feature is enabled and that the status is ONLINE. This means that the NVR is talking well over the Internet with our P2P cloud server that allows you to access from the Internet with no configuration or static IP. If the state is not ONLINE recheck the steps above because it means that your NVR is unable to access the Internet.
Page 19
INSTALLATION MANUAL RKK SERIES - KIT CAMERA / NVR POE Page: 19 Page: 19 Connect with the browser on the internal network If you have a computer connected to the same network of your kit, you can view your cameras simply by your Internet browser...
INSTALLATION MANUAL RKK SERIES - KIT CAMERA / NVR POE Page: 20 Page: 20 2 - ENTER THE ADDRESS OF YOUR NETWORK NVR In the previous chapter we saw how the IP address that your NVR is using the local network by opening the Settings menu in the NETWORK section.
Page 21
INSTALLATION MANUAL RKK SERIES - KIT CAMERA / NVR POE Page: 21 Page: 21 5 - FINISHED Now you logged in and you can see images of the live cameras clicking the camera icon. You can also review the records by clicking PLAY and change the configuration of the system that we will see in the manual the advanced settings.
Page 22
INSTALLATION MANUAL RKK SERIES - KIT CAMERA / NVR POE Page: 22 Page: 22 Connect with your mobile phone and via internet To connect via the Internet and by mobile phone check the manual for remote access to our cloud server P2P.
Page 23
Add a POU RK Series camera to your kit The POE RKK kits allow you to add in self-configuration Plug and Play also any POE DSE Series RK camera. If you buy one of our RK Series IP camera and connect to a POE port on your kit, it will automatically configure.
Page 24
Add a POE camera Onvif to your kit The POE RKK kits allow you to add IP cameras of other DSE ranges, such as motorized cameras, and even the ONVIF IP cameras from other manufacturers. It 'a very interesting option if you want to retrieve the cameras you already have. However, it is not a plug and play function.
Page 25
INSTALLATION MANUAL RKK SERIES - KIT CAMERA / NVR POE Page: 25 Page: 25 2 - Now that you found out what address assigned to the camera, see the instructions of your camera to how to change the network address. Most IP cameras have a configuration software, or you can change the network settings with a browser. In the...
Page 26
INSTALLATION MANUAL RKK SERIES - KIT CAMERA / NVR POE Page: 26 Page: 26 3 - After saving the new parameters, disconnect the camera from your external network and connect it to a POE port of the NVR 4 - Check that the two port LEDs are lit normally, one fixed and one flashing, because this means that the camera communicates from the hardware point of view.
Page 27
INSTALLATION MANUAL RKK SERIES - KIT CAMERA / NVR POE Page: 27 Page: 27 Set the mode of adding in MANUAL and enter the IP that you gave to the camera and the access password. It 'also very important to include the onvif communication port used by the camera (the most common being 80, 8999, 8080, 8000), as it should be in the camera documentation.
Page 28
INSTALLATION MANUAL RKK SERIES - KIT CAMERA / NVR POE Page: 28 Page: 28 TIP - If you want you can give the new camera an external network address, instead of an address of the NVR internal network. For example if your external network, it is connected to the NET port NVR, use the class, you can assign the address 192.168.1.xxx 192.168.1.10.
Page 29
INSTALLATION MANUAL RKK SERIES - KIT CAMERA / NVR POE Page: 29 Page: 29 Add Onvif external camera to your kit The POE RKK kits allow you to not only control the cameras connected to the NVR POE ports, but also cameras connected on your external network, one connected to the NET port of NVR.
Page 30
INSTALLATION MANUAL RKK SERIES - KIT CAMERA / NVR POE Page: 30 Page: 30 Log in to the internal configuration of the cameras The cameras of RKK kits are already factory configured for optimal performance for most applications. Through the NVR menu you can adjust the main output of the image parameters.
Page 31
INSTALLATION MANUAL RKK SERIES - KIT CAMERA / NVR POE Page: 31 Page: 31 2 - To be able to communicate with the camera first thing you have to temporarily change your computer's network settings. By setting any address in the class 192.168.11 .. as in the following example.
Page 32
INSTALLATION MANUAL RKK SERIES - KIT CAMERA / NVR POE Page: 32 Page: 32 Factory USER: admin PASSWORD: admin Do not use the credentials of the NVR are another matter. Inside the configuration page you can find the IMAGE section which contains the video output settings. Consult the manual configuration of our IP cameras RK series for information.
Need help?
Do you have a question about the RKK Series and is the answer not in the manual?
Questions and answers