DSE RKK Series Installation Manual
Repeater for wifi kit
Hide thumbs
Also See for RKK Series:
- Instruction manual (36 pages) ,
- Installation manual (32 pages) ,
- Configuration manual (20 pages)
Subscribe to Our Youtube Channel
Related Manuals for DSE RKK Series
Summary of Contents for DSE RKK Series
- Page 1 INSTALLATION MANUAL RKK SERIES – RKK-EXT3 WIFI REPEATER Page:1 Repeater for WiFi Kit RKK-EXT3 Installation manual How to install the repeater in a wifi kit DSE SRL – ITALY – WWW.DSE.EU...
- Page 2 What did you buy The RKK series WiFi kits allow a maximum distance between cameras and NVRs of about 3-4 rooms. If you place the RKK-KIT1 repeater in the coverage area of the kit, you will re-launch the signal for a further 3-4 rooms.
- Page 3 INSTALLATION MANUAL RKK SERIES – RKK-EXT3 WIFI REPEATER Page:3 Make the network of the NVR visible The first thing you need to do to install a wifi repeater in your kit is to make the NVR's wifi network visible from external devices, such as a mobile phone. You can do this in the NVR settings in the NETWORK/WIFI section and by pressing the ADVANCED button The important entry is AREA.
- Page 4 INSTALLATION MANUAL RKK SERIES – RKK-EXT3 WIFI REPEATER Page:4 In the wifi settings of the NVR you will also find the Password to access the wifi network which by default is "lspassword” (the first letter is a lowercase L) You now have full control over your NVR's wifi network: you can see the NVR's wifi network with other devices, know its name (SSID) and access password.
- Page 5 INSTALLATION MANUAL RKK SERIES – RKK-EXT3 WIFI REPEATER Page:5 Choose the location of the repeater To install an RKK-EXT1 repeater you just need to plug it into the power outlet. However, the location you choose is crucial for proper functioning.
- Page 6 INSTALLATION MANUAL RKK SERIES – RKK-EXT3 WIFI REPEATER Page:6 To cover even large areas you can install up to 2 repeaters in your system. If you do this, remember that the two repeaters must be placed in opposite directions with respect to the NVR and never in the same direction.
- Page 7 INSTALLATION MANUAL RKK SERIES – RKK-EXT3 WIFI REPEATER Page:7 DSE SRL – ITALY – WWW.DSE.EU...
- Page 8 INSTALLATION MANUAL RKK SERIES – RKK-EXT3 WIFI REPEATER Page:8 Ignition sequence with repeater If you use a repeater you must avoid that distant cameras, which must connect to the repeater, connect by mistake to the NVR, which has the same SSID. This could happen if the NVR network reaches, even if only weakly, the distant cameras.
- Page 9 INSTALLATION MANUAL RKK SERIES – RKK-EXT3 WIFI REPEATER Page:9 Connect the repeater purchased together with the RKK wifi kit If you bought the wifi repeater together with your wifi kit, you don't have to worry about any configuration, because it is delivered to you already paired with your NVR, ready to work. The cameras will automatically connect to the repeater if the NVR network is not available because it is too far away.
- Page 10 INSTALLATION MANUAL RKK SERIES – RKK-EXT3 WIFI REPEATER Page:10 Set up a repeater not purchased with the kit. If you didn't buy a repeater with the kit, don't worry. It is quite common to buy it later to solve problems of range due to unforeseen obstacles.
- Page 11 INSTALLATION MANUAL RKK SERIES – RKK-EXT3 WIFI REPEATER Page:11 keep the connection. Make sure you haven't activated functions on your phone that automatically leave wifi networks that don't allow access to the Internet. Check that the phone remains permanently connected to the new repeater network.
-
Page 12: Factory Default Settings
INSTALLATION MANUAL RKK SERIES – RKK-EXT3 WIFI REPEATER Page:12 To access the device, choose the English language and then enter the factory password: admin FACTORY DEFAULT SETTINGS: 192.168.10.1 Password: admin 3 - CONNECT THE REPEATER TO THE NVR NETWORK The repeater automatically searches for available wifi networks and will find that of the wifi NVR named HS--------- DSE SRL –... - Page 13 INSTALLATION MANUAL RKK SERIES – RKK-EXT3 WIFI REPEATER Page:13 Now it's time to connect the repeater to the NVR network. Touch the NVR network that starts with HS--- and do the following: - enter the factory password “lspassword” (with the initial lowercase letter e).
- Page 14 INSTALLATION MANUAL RKK SERIES – RKK-EXT3 WIFI REPEATER Page:14 It is very important to delete the final -plus characters in the SSID box to make sure that the repeater's SSID is the same as the NVR's original network. The cameras of our kits, in fact, search for the SSID of their NVR and must find the same SSID in the repeater in order to connect.
- Page 15 INSTALLATION MANUAL RKK SERIES – RKK-EXT3 WIFI REPEATER Page:15 3 - Check that you are connected to the wifi network of the repeater and not to the NVR. The two networks have the same name and if you have not turned off the NVR you may not distinguish them. To do this, touch the settings icon live on the wifi network and check the IP address your phone has If the IP address is like 172.20.18 it means that you are connected to the NVR network and you will not be able...
- Page 16 INSTALLATION MANUAL RKK SERIES – RKK-EXT3 WIFI REPEATER Page:16 check the repeater. If instead you see an address of 192.168.10… then you are connected to the repeater and can continue 4 - Access the repeater configuration by connecting your browser to 192.168.10.1 5 - Click the menu at the top right and open the ADVANCE section 6 –...
- Page 17 INSTALLATION MANUAL RKK SERIES – RKK-EXT3 WIFI REPEATER Page:17 FINISHED! Now the repeater has connected to the wifi network of the NVR and relaunches the signal. The settings remain memorized even in the event of a power failure. You can now unplug the repeater from the socket and place it where it will really operate.
- Page 18 INSTALLATION MANUAL RKK SERIES – RKK-EXT3 WIFI REPEATER Page:18 DSE SRL – ITALY – WWW.DSE.EU...
-
Page 19: More Features
INSTALLATION MANUAL RKK SERIES – RKK-EXT3 WIFI REPEATER Page:19 More features FACTORY RESET To return to the factory parameters, with the repeater broadcasting its wifi networks, press and hold the front button for 8 seconds. After the reset, the repeater returns with the factory IP and, at the first...
Need help?
Do you have a question about the RKK Series and is the answer not in the manual?
Questions and answers