Subscribe to Our Youtube Channel
Related Manuals for DSE RY Series
Summary of Contents for DSE RY Series
- Page 1 INSTALLATION MANUAL RY SERIES - IP CAMERAS ANPR Page:1 ANPR IP cameras RY Series - Version with LCD monitor Installation manual How to install the camera How to connect to the network DSE SRL - ITALY - WWW.DSE.EU...
-
Page 2: Contents Of The Manual
Page:2 Contents of the manual The range of RY series cameras is a range of IP POE cameras for legible registration of license plates. These cameras are designed to allow the recording of license plates of vehicles in slow or fast motion, up to 180 km / h. -
Page 3: Installation
INSTALLATION MANUAL RY SERIES - IP CAMERAS ANPR Page:3 Installation CONNECTIONS All RY series cameras they have 2 connectors: a mains socket and a 12VDC power plug 12VDC NETWORK RJ45 NETWORK PORT - RJ45 FEMALE connector to connect the LAN network. This connector ... -
Page 4: Positioning The Camera
INSTALLATION MANUAL RY SERIES - IP CAMERAS ANPR Page:4 The cameras are equipped with a bracket for wall mounting made to allow the passage of cables inside it. The bracket is usually mounted at the cable exit. The fixing base has 4 holes for wall fixing with plugs. - Page 5 INSTALLATION MANUAL RY SERIES - IP CAMERAS ANPR Page:5 The camera is equipped with a CDS sensor that allows to detect the ambient brightness and is placed on the back of the camera to avoid incorrect detections due to car headlights. The sensor is located in the rear cable gland of the housing.
-
Page 6: Network Configuration
To assign the correct IP address to the camera, use the SEARCHTOOL configuration software which can be downloaded from our website in the SOFTWARE | IP CAMERAS | RY SERIES. The function of this software is to detect the presence of the camera on the network, whatever its address, and to allow the camera address to be changed in order to be consistent with the local network. - Page 7 INSTALLATION MANUAL RY SERIES - IP CAMERAS ANPR Page:7 In the example above, the address of the PC you are working on is 192.168.2.3 and the subnet mask used is the classic 255.255.255.0. You can therefore assign an address of your choice to the camera, such as 192.168.2.XXX, where XXX stands for a number between 0...
- Page 8 Page:8 USE OF SEARCH TOOL TO ASSIGN THE IP ADDRESS All RY series cameras are preset with the factory IP address: 192.168.1.109 After connecting the camera, you need to change the camera address to assign one that is consistent with your network (first 3 parts of the address common to all equipment on the network).
- Page 9 INSTALLATION MANUAL RY SERIES - IP CAMERAS ANPR Page:9 Click on the camera and the NEXT button to open the address configuration page Now enter the correct network parameters you want to assign to the camera. The IP address must be entered in the red box. It must have the first 3 digits the same as those used by your network and not be used by other equipment, as we have explained extensively in the previous chapter.
- Page 10 INSTALLATION MANUAL RY SERIES - IP CAMERAS ANPR Page:10 255.255.255.0). The gateway is the address of the network equipment that allows access to the Internet (usually a router with the xxx.xxx.xxx. 1 address of the network). The factory port used for communication is 80 and it is advisable not to change it.
- Page 11 INSTALLATION MANUAL RY SERIES - IP CAMERAS ANPR Page:11 Access with browser To control the camera you can use the INTERNET EXPLORER browser. It is not possible to use other browsers for access except by using the IETAB plug-in. If you log in with other browsers, such as Chrome or Firefox you will be able to control the commands (zoom, focus, settings) but you will not be able to see the live video of the camera.
-
Page 12: Activex Installation
IP 192.168.2.30 on port 85. ACTIVEX INSTALLATION In order for the RY series IP cameras to be viewable on the browser, the ActiveX components must be installed. At the first access you make, the camera will detect the lack of these components and will show the installation message. - Page 13 INSTALLATION MANUAL RY SERIES - IP CAMERAS ANPR Page:13 It is possible to either run the program directly by choosing RUN or to save the file on the local PC and then install it manually. To install the plugin you need to close the browser. Once the program has been installed, restart the browser and connect again.
- Page 14 RY SERIES - IP CAMERAS ANPR Page:14 Choose the ENGLISH language and the PC VIEW mode. Then enter your credentials The factory access data of the RY Series cameras are: USER NAME: admin PASSWORD: admin You enter the camera control mask.
- Page 15 INSTALLATION MANUAL RY SERIES - IP CAMERAS ANPR Page:15 In this live view window there are some commands that you can use right away to properly install the camera. The main one is the lens adjustment which is described below.
-
Page 16: Lens Adjustment
INSTALLATION MANUAL RY SERIES - IP CAMERAS ANPR Page:16 Lens adjustment These cameras are equipped with a motorized lens with autofocus. For effective license plate capture it is essential that the lens is perfectly adjusted. The adjustment is made by connecting to the browser, as explained in the previous chapter. - Page 17 INSTALLATION MANUAL RY SERIES - IP CAMERAS ANPR Page:17 ANPR regulation These ANPR license plate cameras are developed to capture the license plate in a legible way in all conditions. Connected to an NVR, they guarantee to find plates that are always legible in the recordings.
- Page 18 INSTALLATION MANUAL RY SERIES - IP CAMERAS ANPR Page:18 available: 30Km / h, 60 Km / h, 90 Km / h, 120 KM / h, 150 Km / h, 180 Km / h. Consider that the higher the speed of the media set, the darker the night image will be as a faster shutter speed is required.
- Page 19 INSTALLATION MANUAL RY SERIES - IP CAMERAS ANPR Page:19 HSBLC corrected Insufficient HSBLC WDR- This parameter allows to increase the visibility of the environment around the vehicle. You can set this function on progressively increasing values: CLOSE (excluded), LOW, MEDIUM,...
- Page 20 INSTALLATION MANUAL RY SERIES - IP CAMERAS ANPR Page:20 WDR MEDIUM The environment around the vehicle is more visible SCENE BRIGHT- Here you can set the night brightness of the environment in which shooting takes place. You can choose the increasing values CLOSE (excluded), LOW, MEDIUM, HIGHER, HIGH.
- Page 21 INSTALLATION MANUAL RY SERIES - IP CAMERAS ANPR Page:21 distance. You have 13 levels of LED brightness (1..13). If the plate is shot closely, below 10 m. for example, it may be convenient to reduce the brightness of the LEDs to prevent it from being too bleached.
- Page 22 INSTALLATION MANUAL RY SERIES - IP CAMERAS ANPR Page:22 HSBLC function is activated only when a vehicle passes while it remains deactivated if no vehicles pass. This usually improves the overall quality of the shot because the HSBLC function tends to mask any area of the shot that is very bright.
- Page 23 INSTALLATION MANUAL RY SERIES - IP CAMERAS ANPR Page:23 Vehicle capture adjustments These cameras are not only able to record license plates in a legible way, but also have an algorithm that allows them to detect the presence of a vehicle and perform automatic actions, regardless of the license plate.
- Page 24 INSTALLATION MANUAL RY SERIES - IP CAMERAS ANPR Page:24 SET ACTIONS TO BE PERFORMED In SETTING | CAPTURE | CAPTURE LINKAGE sets the actions to be performed when the camera detects a vehicle DSE SRL - ITALY - WWW.DSE.EU...
- Page 25 INSTALLATION MANUAL RY SERIES - IP CAMERAS ANPR Page:25 E-MAIL ALARM - Send the photo via email by setting the SMTP server data to be used for sending and the recipient email address SEND PICTURE FTP - Sends the photo via FTP by setting the access data to the FTPS serverEND...
- Page 26 To control the RY cameras from a computer, you can download the IP CAMERA CLIENT software from our website in the SOFTWARE | IP CAMERAS | RY SERIES. This program allows you to manage the cameras from a PC without using the browser. It starts up in just a few steps.The...
- Page 27 INSTALLATION MANUAL RY SERIES - IP CAMERAS ANPR Page:27 3. You can now return to the live view area by clicking the icon above On the left you will find your area with the IP address you added. Double-click to show the video channels connected to the IP address, then drag the video channel into a visual box with the mouse.
- Page 28 INSTALLATION MANUAL RY SERIES - IP CAMERAS ANPR Page:28 DSE SRL - ITALY - WWW.DSE.EU...
- Page 29 INSTALLATION MANUAL RY SERIES - IP CAMERAS ANPR Page:29 Connection with RTSP player The cameras support the RTSP protocol which is factory set to use port 554. It is possible to connect to the camera using any RTSP player such as VLC.
- Page 30 INSTALLATION MANUAL RY SERIES - IP CAMERAS ANPR Page:30 DSE SRL - ITALY - WWW.DSE.EU...
- Page 31 As a rule, the NVRs automatically recognize the communication parameters to communicate with the cameras.If manual entry is necessary, note that the RY series cameras use port 8080 to communicate with the NVRs over the onvif protocol.
- Page 32 P2P cloud server. Each user of a RY series camera purchases together with it the possibility of using a free CLOUD service available online to make connection via the Internet very simple.
- Page 33 INSTALLATION MANUAL RY SERIES - IP CAMERAS ANPR Page:33 2. Choose the SETTINGS folder, then, in the menu on the left, open the NETWORK / P2P page 3. The camera you purchased is already registered in the CLOUD server and is marked with a unique Serial Number (UID) that you see on this page.
- Page 34 To connect via the Internet with a computer using the P2P cloud, use the HIP2P CLIENT program that you can download from our website in the SOFTWARE | IP CAMERAS | RY SERIES. Forconnect via the Internet using the HIP2P program proceed as follows: 1.
- Page 35 INSTALLATION MANUAL RY SERIES - IP CAMERAS ANPR Page:35 3. Now you need to add the camera by operating in the settings and in the DEVICE MANAGEMENT section. You don't have to use the IP address, but the UID code that you could detect in the P2P configuration as seen above.
- Page 36 INSTALLATION MANUAL RY SERIES - IP CAMERAS ANPR Page:36 4. You can now return to the live view area by clicking the icon above On the left you will find your area with the camera you added inside. Drag it with the mouse in a visual pane.
- Page 37 INSTALLATION MANUAL RY SERIES - IP CAMERAS ANPR Page:37 DSE SRL - ITALY - WWW.DSE.EU...
- Page 38 INSTALLATION MANUAL RY SERIES - IP CAMERAS ANPR Page:38 Web access with P2P from APP It is possible to connect to the cameras via the Internet using the P2P cloud and the application CAMHIavailable for Android and iOS and downloadable for free from Google Play or Apple Store.
- Page 39 INSTALLATION MANUAL RY SERIES - IP CAMERAS ANPR Page:39 4. To start live playback tap the camera. You can take photos or record video by tapping the camera and camera icon. To listen to the audio tap the speaker icon. With the triangle icon you can flip the image horizontally or vertically.
- Page 40 INSTALLATION MANUAL RY SERIES - IP CAMERAS ANPR Page:40 are not active on these models. DSE SRL - ITALY - WWW.DSE.EU...
-
Page 41: Advanced Configuration
INSTALLATION MANUAL RY SERIES - IP CAMERAS ANPR Page:41 Advanced configuration The configuration of the more specific parameters of the camera can be done through the Internet Explorer browser. Normally intervening in these adjustments is not necessary in most applications. - Page 42 INSTALLATION MANUAL RY SERIES - IP CAMERAS ANPR Page:42 For each stream you can set the resolution (max 1920x1080), the bit rate or band occupied (the higher the band corresponds to the lower compression and therefore the better quality), the frame rate or number of frames / second (max 25/30 f / sec which corresponds to real-time video) and finally the type of bitrate control (VBR = variable or CBR = constant).
-
Page 43: Media > Image
INSTALLATION MANUAL RY SERIES - IP CAMERAS ANPR Page:43 TIME STAMP - superimposing the time and date TIME SHOW - showing the date at the top (TOP) or at the bottom (BASE) CAMERA NAME - show the camera name NAME SHOW - show the name at the top (TOP) or... - Page 44 INSTALLATION MANUAL RY SERIES - IP CAMERAS ANPR Page:44 SLIDERS - Use the sliders to adjust the visual parameters FLIP / MIRROR - Flip the image horizontally or vertically. WDR - Wide Dynamic Range - Improves the vision of areas with different levels of brightness...
-
Page 45: Media > Audio
INSTALLATION MANUAL RY SERIES - IP CAMERAS ANPR Page:45 MEDIA / AUDIO In this section you can adjust the audio. The cameras are equipped with an external input for connecting a microphone AUDIO TYPE - Defines the G711 or G726 audio compression... - Page 46 INSTALLATION MANUAL RY SERIES - IP CAMERAS ANPR Page:46 Generally these parameters are programmed during installation with the IPCamera program. In this window it is possible to modify them if necessary, taking care to do so consciously since modifying these settings normally leads to having to adapt the client devices to be able to maintain the connection.
-
Page 47: Network / Wireless
INSTALLATION MANUAL RY SERIES - IP CAMERAS ANPR Page:47 Here you can change, if necessary, the communication ports that the camera uses in the network dialog. HTTP PORT- It is the port used by the camera for connection with browsers. Port 80 by default is the one used by browsers normally if you do not specify a different port. - Page 48 INSTALLATION MANUAL RY SERIES - IP CAMERAS ANPR Page:48 NETWORK / PLATFORM Not used NETWORK / ONVIF In this section you can adjust some features in the management of the onvif protocol used by the camera to communicate with the NVR. It is advisable not to change these parameters except to optimize the dialogue with your NVR.
-
Page 49: Alarm / Motion Detection
INSTALLATION MANUAL RY SERIES - IP CAMERAS ANPR Page:49 NETWORK / P2P Connection management with P2P servers already described previously in this manual ALARM / MOTION DETECTION These cameras can detect the presence of movement in the field of view and trigger alarm actions. - Page 50 INSTALLATION MANUAL RY SERIES - IP CAMERAS ANPR Page:50 The detection area is drawn by dragging the mouse. The cameras can manage 4 different detection areas. For each you can set the detection sensitivity with the slider. ALARM / ALARM This section allows you to define which alarm actions the camera should perform in the event of a motion alarm.
-
Page 51: Alarm / Schedule
INSTALLATION MANUAL RY SERIES - IP CAMERAS ANPR Page:51 E-MAIL ALARM - Enable to send alarm emails in case of motion detection. The photo is attached to the email at the time of detection. EMAIL SETTING - This link opens a popup where you can enter the sending data of the email. It... -
Page 52: Advanced / User
INSTALLATION MANUAL RY SERIES - IP CAMERAS ANPR Page:52 The green colored boxes represent the time slots where the detection will be active SELECT LIST - Activates all time slots CLEAR LIST - Disables all time bands ADVANCED / USER This section allows you to change the passwords for accessing the camera. - Page 53 INSTALLATION MANUAL RY SERIES - IP CAMERAS ANPR Page:53 In these boxes you can change your username and password as you like, taking care not to forget them. ADVANCED / AUTO SNAP This function is very convenient if you use the camera to update the image of a website for example for a webcam service.
-
Page 54: System Time
INSTALLATION MANUAL RY SERIES - IP CAMERAS ANPR Page:54 Not used SYSTEM / TIME This section allows you to change the time displayed by the overlay camera TIME - Displays the current date and time stored in the camera NETWORK TIME PROTOCOL (NTP) - By selecting this option it is possible to have the camera automatically synchronize the time and date via the internet with an NTP (Network Time Protocol) server chosen from the list available. -
Page 55: System Initialize
INSTALLATION MANUAL RY SERIES - IP CAMERAS ANPR Page:55 SYSTEM / INITIALIZE This section allows some maintenance functions LENS - Not used REBOOT - Reboot the camera FACTORY DEFAULT - Restore factory parameters BACKUP SETTNG - Exports the camera configuration to a .BIN file that can be saved on the local... - Page 56 INSTALLATION MANUAL RY SERIES - IP CAMERAS ANPR Page:56 DSE SRL - ITALY - WWW.DSE.EU...
-
Page 57: Restore Factory Configuration
INSTALLATION MANUAL RY SERIES - IP CAMERAS ANPR Page:57 Restore factory configuration If you've messed around excessively with the adjustments and are now unable to get the correct view of the license plates, you can restore the factory settings. The factory settings are the most suitable for most applications and almost always allow the reading of the license plate in all situations.
Need help?
Do you have a question about the RY Series and is the answer not in the manual?
Questions and answers