DSE RH Series Installation Manual
Onvif ip cameras
Hide thumbs
Also See for RH Series:
- Manual configuration instructions (68 pages) ,
- Manual (41 pages) ,
- Configuration (12 pages)
Subscribe to Our Youtube Channel
Related Manuals for DSE RH Series
Summary of Contents for DSE RH Series
- Page 1 INSTALLATION MANUAL RH SERIES - ONVIF IP CAMERAS Page:1 RH-xxx Fixed IP cameras RH-SDxxx Motorized IP cameras RH2-xxx 720P IP cameras DSE SRL - ITALY - WWW.DSE.EU...
- Page 2 Page:2 Introduction The RH series consists of IP network cameras based on ONVIF protocol with resolution from HD720P, up to 4K. The units connect to a LAN via the RJ45 port like a computer or other network unit and the images are displayed on the PCs on the network using an Internet browser (IE, Chrome, Safari etc.) or special recording programs.
-
Page 3: Installation
RH-TCC1- Box room CHOICE OF OBJECTIVE The camera is supplied without a lens. It is possible to combine all DSE VARIFOCAL lenses. For optimal results, you need to choose megapixel lenses capable of supporting the resolution of the camera (Ref. OM-xxxx). Also if you plan to use it with infrared illuminators use lenses with IR correction (Ref. -
Page 4: Rear Connections
INSTALLATION MANUAL RH SERIES - ONVIF IP CAMERAS Page:4 REAR CONNECTIONS AUDIO IN - MICROPHONE IN - The camera is equipped with a built-in microphone however a 3.5 mm minijack is available to connect an external microphone. The choice between the two sources is made in configuration. - Page 5 INSTALLATION MANUAL RH SERIES - ONVIF IP CAMERAS Page:5 If you need to assemble the connecting cable between the microphone and the camera yourself, remember to connect the stocking of the 2 video cables to the first segment near the connector body and the 2 video signals to the remaining two segments in the center and at the end of the connector.
-
Page 6: Mounting The Camera
INSTALLATION MANUAL RH SERIES - ONVIF IP CAMERAS Page:6 Example of input connection VIDEO OUT - BNC output for connecting analog monitors. For example, it allows you to connect a portable monitor so that you can focus on the lens comfortably after mounting. - Page 7 INSTALLATION MANUAL RH SERIES - ONVIF IP CAMERAS Page:7 RH-BCC1xxx- Waterproof camera with IR up to 80 m. OBJECTIVE ADJUSTMENT The camera is equipped with an adjustable lens to allow perfect adjustment of the area to be framed. The camera body is equipped with two screws to adjust the focal (ZOOM) and focus (FOCUS) placed in the lower part of the camera or with a motorized lens.
- Page 8 INSTALLATION MANUAL RH SERIES - ONVIF IP CAMERAS Page:8 RJ45 (NETWORK) (1) - MALE RJ45 connector to connect the network. For connection to a HUB or network switch use a normal LAN cable. To connect only one PC directly, use a crossover cable. The RJ45 female-female adapter is provided to connect a cable with a male connector.
- Page 9 INSTALLATION MANUAL RH SERIES - ONVIF IP CAMERAS Page:9 ZOOM ADJUSTMENT (1) - Adjusts the focal length from 2.8 to 12 mm FOCUS ADJUSTMENT (2) - Adjusts the focus SLOT Micro SD CARD (3) - The slot to insert a Micro SD card (max 64GB) to save images on ...
- Page 10 INSTALLATION MANUAL RH SERIES - ONVIF IP CAMERAS Page:10 A metal fixing ring is supplied with the camera to be fixed to the wall with 4 anchors (supplied) using the drilling template included in the package. The word TOP is indicated on the ring to indicate the side to be held up.
- Page 11 INSTALLATION MANUAL RH SERIES - ONVIF IP CAMERAS Page:11 RH-BCC3-4- Waterproof camera with IR 25 m. OBJECTIVE ADJUSTMENT The camera is equipped with an adjustable lens to allow perfect adjustment of the area to be framed. The lens is equipped with two rings to adjust the focal (ZOOM) and focus (FOCUS) which can be accessed by unscrewing the white door located at the bottom of the camera.
- Page 12 INSTALLATION MANUAL RH SERIES - ONVIF IP CAMERAS Page:12 RJ45 (NETWORK) (1) - MALE RJ45 connector to connect the network. For connection to a HUB or network switch use a normal LAN cable. To connect only one PC directly, use a crossover cable. The RJ45 female-female adapter is provided to connect a cable with a male connector.
- Page 13 INSTALLATION MANUAL RH SERIES - ONVIF IP CAMERAS Page:13 SLOT Micro SD CARD (1) - The slot to insert a Micro SD card (max 64GB) to save images on the same camera is located behind the watertight door located on the bottom side of the camera.
- Page 14 INSTALLATION MANUAL RH SERIES - ONVIF IP CAMERAS Page:14 RH-DCCxxx- 30 m IR waterproof camera. MOUNTING THE CAMERA The camera is closed in a vandal-proof waterproof container that can be installed on the ceiling both indoors and outdoors. The camera is made up of 3 distinct parts: FIXING BASE, CHAMBER BODY AND DOME COVER.
- Page 15 INSTALLATION MANUAL RH SERIES - ONVIF IP CAMERAS Page:15 Fasten the fixing base to the ceiling with dowels using the drilling template provided. Different fixing options with 2 or more anchors are available. Once the base has been fixed to the ceiling, make the...
- Page 16 INSTALLATION MANUAL RH SERIES - ONVIF IP CAMERAS Page:16 Close the container by mounting the dome dome. CONNECTIONS The connections are placed on the cable that comes out of the camera The cable with the connections is 40 cm long and is used to reach a protected box to be arranged so as to house the connectors inside.
- Page 17 INSTALLATION MANUAL RH SERIES - ONVIF IP CAMERAS Page:17 Example of input connection VIDEO OUT - Output to connect analog monitors. For example, it allows you to connect a portable monitor so that you can focus on the lens comfortably after mounting. It is placed on the camera card near the SD card slot.ATTENTION: this output may not be active if disabled in the...
- Page 18 INSTALLATION MANUAL RH SERIES - ONVIF IP CAMERAS Page:18 RH-DCC2 RH2-DCC2- Waterproof IR camera 6 m. RH2-BCC2 15 m IR waterproof camera. MOUNTING THE CAMERA The RH-DCC2 and RH2-DCC2 mini dome cameras are closed in a waterproof container that can be installed on the ceiling both indoors and outdoors by proceeding as follows.
- Page 19 INSTALLATION MANUAL RH SERIES - ONVIF IP CAMERAS Page:19 Fix the fixing base to the ceiling after connecting the connections. Cable exit can take place on the back of the container or on the side. Insert the BNC cable into the connector and connect a service monitor to conveniently adjust the focus and position of the lens.
- Page 20 INSTALLATION MANUAL RH SERIES - ONVIF IP CAMERAS Page:20 Close the container by tightening the screws. CONNECTIONS The connections are placed on the cable that comes out of the camera The cable with the connections is 40 cm long and is used to reach a protected box to be arranged so as to house the connectors inside.
- Page 21 INSTALLATION MANUAL RH SERIES - ONVIF IP CAMERAS Page:21 speakers. This function allows you to create a two-way audio conversation between the person in front of the camera and the operator in front of the client PC (not available on RH2-BCC2) - Impedance sup.
- Page 22 INSTALLATION MANUAL RH SERIES - ONVIF IP CAMERAS Page:22 RH2-TCC3- Pin-hole camera MOUNTING THE CAMERA The camera is closed in a protected but NOT watertight container that can be installed on the wall or ceiling. The camera is equipped with a bracket.
-
Page 23: Alarm Out
INSTALLATION MANUAL RH SERIES - ONVIF IP CAMERAS Page:23 Color Function Description Orange ALARM IN COM ALARM IN Yellow ALARM IN NO It is used to initiate automatic camera actions with Grey ALARM OUT 2 external contacts that may come from sensors,... -
Page 24: Video Out
INSTALLATION MANUAL RH SERIES - ONVIF IP CAMERAS Page:24 restore factory settings including network data. RCA White AUDIO IN MICROPHONE INPUT - The camera is equipped with a female RCA connector to connect an external microphone. 12VDC 12VDC power supply to be connected to the 220VAC / 12VDC power supply not supplied. - Page 25 INSTALLATION MANUAL RH SERIES - ONVIF IP CAMERAS Page:25 RH-SD22xxx- Speed dome camera MOUNTING THE CAMERA The camera is closed in a waterproof container that can be installed on the wall both indoors and outdoors. The camera is equipped with a bracket that allows the passage of the cables inside it.
- Page 26 INSTALLATION MANUAL RH SERIES - ONVIF IP CAMERAS Page:26 arranged so as to house the connectors inside. Alternatively, the connectors can be housed in the rear recess of the wall bracket. Color Function Description VIDEO OUT Female BNC video output - Analog video output in PAL...
-
Page 27: Alarm Inputs
INSTALLATION MANUAL RH SERIES - ONVIF IP CAMERAS Page:27 Red-black 24VAC 24VAC power supply to be connected to the supplied Blue White 220VAC power supply Red / Black: camera power supply Blue / White: internal fan / heater power supply... - Page 28 INSTALLATION MANUAL RH SERIES - ONVIF IP CAMERAS Page:28 Other microswitches that are inside the flap are not used in this model. RH-SD30xxx- Speed dome camera MOUNTING THE CAMERA The camera is closed in a waterproof container that can be installed on the wall both indoors and outdoors.
- Page 29 INSTALLATION MANUAL RH SERIES - ONVIF IP CAMERAS Page:29 rear recess of the wall bracket. Color Function Description Red-black 24VAC 24VAC power supply to be connected to the supplied 220VAC power supply RJ45 (NETWORK) RJ45 FEMALE connector to connect the network. For connection to a HUB or network switch use a normal LAN cable.
-
Page 30: Internal Equipment
INSTALLATION MANUAL RH SERIES - ONVIF IP CAMERAS Page:30 microphone. Red RCA AUDIO OUT AUDIO OUT - Female RCA connector that allows you to connect local speakers. This function allows you to create a two-way audio conversation between the person in front of the camera and the operator in front of the client PC. - Page 31 INSTALLATION MANUAL RH SERIES - ONVIF IP CAMERAS Page:31 restore factory settings including network data. MICRO SD CARD SLOT - It is possible to insert an SD card up to 64 GB for storing local films. RH2-CB1W RH2-PT1W- Wi-Fi cameras MOUNTING THE CAMERA Wifi cameras are cameras for indoor use.
- Page 32 INSTALLATION MANUAL RH SERIES - ONVIF IP CAMERAS Page:32 DC5V - Plug to connect the 220VAC / USB 5VDC power supply (included). You can also use a USB port on a PC with the cable provided. These models do not support POE power supply as they are designed to operate even in the absence of a network cable.
- Page 33 INSTALLATION MANUAL RH SERIES - ONVIF IP CAMERAS Page:33 DSE SRL - ITALY - WWW.DSE.EU...
-
Page 34: Network Configuration
INSTALLATION MANUAL RH SERIES - ONVIF IP CAMERAS Page:34 Network configuration After supplying the camera with a 12VDC power supply or via POE and after connecting the network, it is necessary to configure the network parameters in order to make the cameras accessible from the network PCs. - Page 35 INSTALLATION MANUAL RH SERIES - ONVIF IP CAMERAS Page:35 In the example above the address of the PC being worked on is 192.168.2.3 and the subnet mask used is the classic 255.255.255.0. The camera can therefore assign an address of your choice of the type 192.168.2.XXX, where XXX stands for a number between 0 and 255.
- Page 36 It is possible to copy this folder to a USB stick in order to easily run the program on any PC on the network. Click on the START SEARCH button. The program will begin to search for RH series IP cameras on the network. Wait for the search to complete. IP search is also able to detect cameras with an address class different from that of the PC on which it is operating.
- Page 37 INSTALLATION MANUAL RH SERIES - ONVIF IP CAMERAS Page:37 INDICATION OF IP ADDRESS ON BNC OUTPUT If you connect a monitor to the service video output (where present), the IP address of the camera will be superimposed. NETWORK CONNECTION WIFI CAMERAS...
- Page 38 INSTALLATION MANUAL RH SERIES - ONVIF IP CAMERAS Page:38 Access with browser Once the network parameters have been correctly set, it is possible to access the camera for the first time using the internet browser you prefer, for example INTERNET EXPLORER, SAFARI, FIREFOX, CHROME etc.
- Page 39 INSTALLATION MANUAL RH SERIES - ONVIF IP CAMERAS Page:39 The factory access data of the RH Series cameras are: USER NAME: admin PASSWORD: admin You access the control mask of the camera. DSE SRL - ITALY - WWW.DSE.EU...
- Page 40 INSTALLATION MANUAL RH SERIES - ONVIF IP CAMERAS Page:40 On the left of the window are the camera configuration buttons which will be discussed in the specific manual. At the center is the real-time image. In some models the programming part is separated from the live view and you can switch from...
- Page 41 INSTALLATION MANUAL RH SERIES - ONVIF IP CAMERAS Page:41 the camera functions, unlike access with VLC where some advanced functions are not accessible. To switch from VLC display to ActiveX display, press the link under the video window. The ActiveX component will be installed.
- Page 42 INSTALLATION MANUAL RH SERIES - ONVIF IP CAMERAS Page:42 Explorer add-ons. DSE SRL - ITALY - WWW.DSE.EU...
- Page 43 Page:43 Access with NVR software Windows software is provided with each RH series camera for viewing and recording computer cameras. . The connection with software is certainly the most recommended way to manage your computer cameras both for the completeness of the functions, which go up to the complete remote configuration of the C-MOS sensor, and for the minimization of latency in live viewing.
- Page 44 It is possible to download applications for free from APP STORE and GOOGLE PLAY. For instructions on installing and using DSE SmartLive see the specific manual included on the CD. DSE SRL - ITALY - WWW.DSE.EU...
- Page 45 Page:45 Access with RTSP client All RH series cameras support the RTSP protocol, universal standard in video streaming. It is possible to receive the RTSP video stream of the camera without using either the browser or the PC program, but directly with an RTSP player such as REAL PLAYER, QUICKTIME, VLC etc.
- Page 46 INSTALLATION MANUAL RH SERIES - ONVIF IP CAMERAS Page:46 Enter the address RTSP streaming starts directly from the camera DSE SRL - ITALY - WWW.DSE.EU...
- Page 47 RH SERIES - ONVIF IP CAMERAS Page:47 Access with ONVIF software The RH series cameras can be integrated with any software platform capable of accepting the international standard ONVIF protocol. It is a universal protocol and DSE is part of the association that defines it.
- Page 48 INSTALLATION MANUAL RH SERIES - ONVIF IP CAMERAS Page:48 Choose the EXPRESS detection method. Milestone will detect all cameras on the network with the ONVIF protocol DSE SRL - ITALY - WWW.DSE.EU...
- Page 49 INSTALLATION MANUAL RH SERIES - ONVIF IP CAMERAS Page:49 Select the camera and indicate the access credentials (default admin / admin) Click NEXT to continue DSE SRL - ITALY - WWW.DSE.EU...
- Page 50 INSTALLATION MANUAL RH SERIES - ONVIF IP CAMERAS Page:50 Click FINISH to incorporate the camera into the milestone program Once the connection with the camera is finished, some further settings are required in the configuration Right click on the camera icon ...
- Page 51 INSTALLATION MANUAL RH SERIES - ONVIF IP CAMERAS Page:51 Choose VIDEO / CONFIGURE VIDEO PROPERTIES Select the stream to be used and the RTP / RTSP / TCP protocol Click PREVIEW IMAGE to test live viewing DSE SRL - ITALY - WWW.DSE.EU...
- Page 52 INSTALLATION MANUAL RH SERIES - ONVIF IP CAMERAS Page:52 PTZ - If the camera is equipped with pan / tilt it is necessary to set the camera as MOVABLE and the type of PTZ: Relative (type 2) DSE SRL - ITALY - WWW.DSE.EU...
- Page 53 INSTALLATION MANUAL RH SERIES - ONVIF IP CAMERAS Page:53 DSE SRL - ITALY - WWW.DSE.EU...
- Page 54 IP cameras are recorded and controlled more and more frequently with video recorders for IP cameras also called NVRs. The RH series cameras are compatible with all ONVIF compatible NVRs such as our RK Series range. For the integration of the cameras into the NVR, refer to the video recorder manual.
- Page 55 INSTALLATION MANUAL RH SERIES - ONVIF IP CAMERAS Page:55 Web access via router An IP camera system is often placed inside a LAN network connected to the Internet via a router as in the following diagram If we use a PC inside the network to view the cameras, the addresses of the cameras (generally of the type 192.168.XXX.XXX) are directly accessible both via browser and with NetVMS software.
- Page 56 Obviously the direction is carried out only for the communication ports that are used by the cameras and which will be detailed below. The main communication ports used by the RH series cameras are as follows: HTTP PORT: Default 80. The cameras use this port to communicate with browsers such as ...
- Page 57 INSTALLATION MANUAL RH SERIES - ONVIF IP CAMERAS Page:57 address of your camera. Note that many routers require that a rule in the firewall section that determines the opening of the affected port is also associated with each NAT direction. See your router's manual for more details on how to program port mapping DSE SRL - ITALY - WWW.DSE.EU...
-
Page 58: Factory Reset
INSTALLATION MANUAL RH SERIES - ONVIF IP CAMERAS Page:58 Factory reset To restore the factory settings of the cameras, keep the reset button on board pressed for about 10 seconds. Firmware update The firmware update operation of the cameras is potentially dangerous because if it is not successful it can lead to the impossibility of using the camera. - Page 59 INSTALLATION MANUAL RH SERIES - ONVIF IP CAMERAS Page:59 Check the cameras that require updating. Click BROWSE to search for the update file on your hard disk. Finally click UPDATE to start updating all the selected cameras. Wait for the end of the operation without absolutely turning off the cameras or the PC during the procedure.
Need help?
Do you have a question about the RH Series and is the answer not in the manual?
Questions and answers