DSE RKK Series Installation Manual
Hide thumbs
Also See for RKK Series:
- Instruction manual (36 pages) ,
- Installation manual (32 pages) ,
- Configuration manual (20 pages)
Subscribe to Our Youtube Channel
Related Manuals for DSE RKK Series
Summary of Contents for DSE RKK Series
- Page 1 INSTALLATION MANUAL RKK SERIES - WIFI REPEATER Page:1 Repeater for WiFi Kit WiFi repeater Installation manual How to install the repeater in a wifi kit DSE SRL - ITALY - WWW.DSE.EU...
- Page 2 Page:2 What have you bought The RKK series WiFi kits allow a maximum distance between cameras and NVRs of about 4-5 rooms. If you place the RKK-KIT1 repeater in the coverage area of the kit you will relaunch the signal for a further 4-5 rooms. You can use a maximum of 2 repeaters in one kit.
- Page 3 INSTALLATION MANUAL RKK SERIES - WIFI REPEATER Page:3 Make the NVR network visible The first thing you need to do to install a wifi repeater in your kit is to make the wifi network of the NVR visible from external devices, such as a mobile phone. You can do this in the NVR settings in the NETWORK / WIFI section and pressing the ADVANCED button The important entry is AREA.
- Page 4 INSTALLATION MANUAL RKK SERIES - WIFI REPEATER Page:4 In the wifi settings of the NVR you will also find the Password to access the wifi network which by default is "lspassword" (the first letter is a lowercase L) Now you have full control of the wifi network of your NVR: you can see the wifi network of the NVR with other devices, you know its name (SSID) and the login password.
- Page 5 INSTALLATION MANUAL RKK SERIES - WIFI REPEATER Page:5 Choose the location of the repeater To install an RKK-EXT1 repeater you just have to plug it into the power socket. However, the position you choose is essential for proper functioning. 1 - ONLY ONE RKK REPEATER The repeater must be installed at a certain distance from the NVR, but without going out of its wifi coverage.
- Page 6 INSTALLATION MANUAL RKK SERIES - WIFI REPEATER Page:6 To cover even large areas, you can install up to 2 repeaters in your system. If you do this remember that the two repeaters must be placed in opposite directions with respect to the NVR and never in the same direction.
- Page 7 INSTALLATION MANUAL RKK SERIES - WIFI REPEATER Page:7 DSE SRL - ITALY - WWW.DSE.EU...
- Page 8 INSTALLATION MANUAL RKK SERIES - WIFI REPEATER Page:8 Connect the repeater purchased together with the RKK wifi kit If you bought the wifi repeater together with your wifi kit you don't have to worry about any configuration, because it is delivered already paired with your NVR, ready to work. The cameras will automatically connect to the repeater in case the NVR network is not available because it is too far away.
- Page 9 INSTALLATION MANUAL RKK SERIES - WIFI REPEATER Page:9 Configure repeater purchased with the kit. If you didn't buy a repeater along with the kit, don't worry. It is quite common to buy it later to solve flow problems due to unforeseen obstacles.
- Page 10 INSTALLATION MANUAL RKK SERIES - WIFI REPEATER Page:10 keep the connection. Be careful that you have not activated functions in your phone that automatically leave wifi networks that do not allow access to the Internet. Check that the phone remains permanently connected to the new repeater network.
- Page 11 INSTALLATION MANUAL RKK SERIES - WIFI REPEATER Page:11 To access the device, choose the English language and then enter the factory password: admin FACTORY DEFAULT SETTINGS: IP: 192.168.10.1 Password: admin 3 - SET THE BRIDGE MODE As soon as you log in, the repeater automatically scans the available wifi networks and proposes them to you to connect.
- Page 12 INSTALLATION MANUAL RKK SERIES - WIFI REPEATER Page:12 4 - CONNECTED TO THE NVR NETWORK Now it is time to connect the repeater to the NVR network. If you are near the NVR, you will see the NVR network among the available wifi networks. If you don't see the NVR network check how to make it visible in the previous chapters.
- Page 13 INSTALLATION MANUAL RKK SERIES - WIFI REPEATER Page:13 FINISHED! Now the repeater has connected to the wifi network of the NVR and relaunches the signal. The settings remain stored even in the event of a power failure. You can now unplug the repeater from the socket and place it where it really needs to operate.
-
Page 14: Other Features
INSTALLATION MANUAL RKK SERIES - WIFI REPEATER Page:14 Other features FACTORY RESET To return to the factory settings, with the repeater emitting its wifi networks, press and hold the front button for 8 seconds. After the reset, the repeater returns with the factory IP and, at the first access, it asks to set a new user password The RKK repeater supports the connection of WPS devices.
Need help?
Do you have a question about the RKK Series and is the answer not in the manual?
Questions and answers