Page 1
PTZ MANUAL RK SERIES IP CAMERAS Page:1 RK Series IP Cameras Indications for PTZ motorized versions PTZ motorized cameras user manual How to use motorized cameras DSE SRL – ITALY – WWW.DSE.EU...
Page 2
Page:2 Contents of the manual The RK series camera range is a range of IP cameras for wired network connection or WiFi. There are several manuals that describe the various functions of this range and the installation and configuration procedures This manual explains how to use motorized RK cameras, also called PTZ.
Page 3
Page:3 Installation of PTZ cameras CONNECTIONS The RK series speed dome cameras, like normal fixed cameras, have only 2 connections: a mains socket and a 12VDC power plug. The cameras support 12VDC power or POE power along the cable net. Unlike analog models, motorized IP cameras do not require cables additions to the command.
Page 4
If they remain off, check the cable net. SD CARD Some cameras have an internal SD card slot that you can access by unscrewing it rear watertight door. You can insert an SD card to record on the camera. DSE SRL – ITALY – WWW.DSE.EU...
Page 5
Note that if there are multiple people in the frame the camera will tend to follow the largest detection in size. It is not convenient to enable human detection in places with frequent presence of people. DSE SRL – ITALY – WWW.DSE.EU...
Page 6
PTZ MANUAL RK SERIES IP CAMERAS Page:6 DSE SRL – ITALY – WWW.DSE.EU...
Page 7
Once the network parameters have been correctly set, you can log in for the first time towards the camera using the internet browser. RK Series cameras support all of them browsers. How to access with the browser is explained in the...
Page 8
In this section of the manual we see the particularities of the control interface which are available only for PTZ cameras. On the right side of the screen there is the PTZ panel for controlling the cameras motorized DSE SRL – ITALY – WWW.DSE.EU...
Page 9
PTZ MANUAL RK SERIES IP CAMERAS Page:9 PTZ CONTROL DSE SRL – ITALY – WWW.DSE.EU...
Page 10
AUTOTRACKINGif the camera is equipped with it (see below). Like all speed dome cameras, the RK series models can also perform movements automatic.
Page 11
The cameras can manage up to 3 different cruise sequences. The table is set up for 8 cruise sequences which can be started with the PLAY icon or eliminated with the X icon. To configure a cruise sequence click the gear icon DSE SRL – ITALY – WWW.DSE.EU...
Page 13
If you activate autotracking, the camera will automatically move and zoom in order to follow the movements of a person who enters the field of view. You can activate and deactivate autotracking with the button in the browser or by calling up presets 40 (ON) and 41 (OFF). DSE SRL – ITALY – WWW.DSE.EU...
Page 14
This is a necessary operation if you notice that the autofocus is unable to focus correctly beyond a certain zoom level. To calibrate autofocus, bring the camera to maximum zoom, framing a distant object and then press the calibration button in the browser DSE SRL – ITALY – WWW.DSE.EU...
Page 15
If the camera loses autofocus calibration over time it may be worth it reset the PTZ moduleby executing this sequence of commands: 1 – Recall preset 111 2 – Call up preset 222 immediately afterwards DSE SRL – ITALY – WWW.DSE.EU...
Page 16
DOME – PTZ movement settings CAMERA – Camera settings DISPLAY - Overlay settings RESET – Restore factory settings EXIT – Closes the OSD menu SYSTEM MENU This section contains information about the camera module DSE SRL – ITALY – WWW.DSE.EU...
Page 17
You can define the location and time of absence of commands. Return to the Home position is disabled by default. PRIVACY ZONE – Not supported ADVANCED – Here you configure some additional functions of the motorized camera: DSE SRL – ITALY – WWW.DSE.EU...
Page 18
DIGITAL ZOOM – Enables digital zoom in addition to the optical zoom of the lens FOCUS – Set automatic or manual focus IRIS – Set automatic or manual iris BLC – Enable BLC to compensate for backlit shots FREEZE – Freezes the image DSE SRL – ITALY – WWW.DSE.EU...
Page 19
Note that the zoom level overlay is set via system presets. RESET MENU SOME RESTART – Restarts the camera SYS DATA – Restores factory system settings CAM DATA – Restores factory camera settings PRESET – Deletes all user-stored presets DSE SRL – ITALY – WWW.DSE.EU...
Need help?
Do you have a question about the RK Series and is the answer not in the manual?
Questions and answers