Download
Share
Print this page
DSE RH Series Manual
  1. Manuals
  2. Brands
  3. DSE Manuals
  4. Security Camera
  5. RH Series
  6. Manual

DSE RH Series Manual

Hide thumbs Also See for RH Series:

Advertisement

Quick Links

Download this manual
MANUAL CONFIGURATION
STANDARD RH - IP CAMERAS ONVIF
Page: 1
Page: 1
Configuration Options
IP Cameras RH SERIES
DSE SRL - ITALY - WWW.DSE.EU

Advertisement

loading
Need help?

Need help?

Do you have a question about the RH Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for DSE RH Series

Summary of Contents for DSE RH Series

  • Page 1 MANUAL CONFIGURATION STANDARD RH - IP CAMERAS ONVIF Page: 1 Page: 1 Configuration Options IP Cameras RH SERIES DSE SRL - ITALY - WWW.DSE.EU...
  • Page 2 Page: 2 Introduction The RH Series cameras boast a number of configurable operating options. Unlike the majority of network cameras on the market the RH series cameras allow you to customize these settings by cameras with different types of client.
  • Page 3 In the camera installation manual explains how to access the cameras with your PC using a web browser Thanks to Flash technology, supported by RH series cameras can use the browser of your choice, such as INTERNET EXPLORER, SAFARI, FIREFOX, CHROME etc.
  • Page 4 On the left side of the window are The camera configuration buttons which will be discussed in this manual. CAUTION - E 'can connect several clients simultaneously up to a maximum of 10 per camera client. DSE SRL - ITALY - WWW.DSE.EU...
  • Page 5 STANDARD RH - IP CAMERAS ONVIF Page: 5 Page: 5 Playback As of firmware version 1.8 via the web interface can play back movies recorded on the built-in SD card card into the camera (predisposed models) DSE SRL - ITALY - WWW.DSE.EU...
  • Page 6 Here in this chapter we will analyze one by one all the options that are located in these folders. The options are the same for all cameras of the RH series, with slight variations according to the facilities and the individual model-specific functions.

  • Page 7: Device Info

    It is a fundamental adjustment in the economy of a CCTV system over IP and is often mistakenly overlooked with the result of burdening the client and obtain long latencies (delays between action and image). The cameras fact are delivered with factory settings that require a DSE SRL - ITALY - WWW.DSE.EU...
  • Page 8 On a local network typically by adjusting the streaming to engage a maximum of 1000/2000 Kbps per camera you get one FullHD streaming of good quality and can be connected to many cameras without introducing much latency. DSE SRL - ITALY - WWW.DSE.EU...
  • Page 9 3 is reserved for MJPEG, static compression can provide higher video quality but also high bandwidth consumption. RESOLUTION - Defines the resolution 1920x1080 (Full HD) or 640x360, the latter by RESOLUTION - Defines the resolution 1920x1080 (Full HD) or 640x360, the latter by DSE SRL - ITALY - WWW.DSE.EU...
  • Page 10 The VBR is always advisable. By using it the camera will occupy more bandwidth (up to the maximum threshold) if you are in the presence of a lot of movement and reduce the occupied bandwidth in the case of still images. DEVICE CONFIGURATION / LOCAL NETWORK DSE SRL - ITALY - WWW.DSE.EU...
  • Page 11 The cameras support both a fixed IP address automatic assignment in DHCP. The fixed IP address is usually preferred in safety applications as from the guarantee that the address will remain invariable even during blackouts and avoids the need to reconfigure the recording devices. DEVICE CONFIGURATION / DEVICE PORT DSE SRL - ITALY - WWW.DSE.EU...
  • Page 12 RTMP PORT: the port used for video streaming with Flash technology The main motivation to change these ports is the need to make available multiple cameras through a router. In this case, each camera must assign a CONTROL PORT and an HTTP PORT different. For more information see the installation manual. DEVICE CONFIGURATION / ADSL NETWORK DSE SRL - ITALY - WWW.DSE.EU...

  • Page 13: Device Configuration

    VIDEO SYSTEM - Choice of the European frequency 50 Hz or 60 Hz Americana. SOURCE RESOLUTION - Native resolution of the camera. The RH Series cameras incorporate the resolution FULL HD 1920x1080 in SOURCE RESOLUTION - Native resolution of the camera. The RH Series cameras incorporate the resolution FULL HD 1920x1080 in 16.:9.
  • Page 14 ENABLE NTP - you 'can make sure that the camera automatically synchronize the time and date via the internet with an NTP (Network ENABLE NTP - you 'can make sure that the camera automatically synchronize the time and date via the internet with an NTP (Network Time Protocol), chosen from the many available on the net. DSE SRL - ITALY - WWW.DSE.EU...
  • Page 15 For each item you can define the position on the screen indicating that the line (ROW) and column (COLUMN) bring up the overlay. The column 0 and row 0 correspond to the upper left, increasing the value ROW / COLUMN there moves proportionally from the top-left axis vertical and horizontal respectively. DSE SRL - ITALY - WWW.DSE.EU...
  • Page 16 DEVICE CONFIGURATION / MICROPHONE MICROPHONE All RH Series cameras are capable of handling audio bidirectionally. In this tab there are the settings for the microphone for audio recording ENABLE MICROPHONE - Enable sound management in the camera ENABLE MICROPHONE - Enable sound management in the camera...

  • Page 17: Bnc Output

    Page: 17 The motorized cameras speed dome RH series are equipped with an RS485 port that allows to control the movements with a keyboard for speed dome with Pelco P / D protocol. In this window it is possible to insert the RS485 address of the camera by typing on the keyboard to be able to be controlled.
  • Page 18 Selection of the language in which the camera uses OSD overlays. It allows you to manage non-standard of some foreign language characters. Italy To keep the setting International Factory (English). EXTERNAL DEVICE / PTZ DSE SRL - ITALY - WWW.DSE.EU...
  • Page 19 Page: 19 Some RH series cameras are equipped with an RS485 port which can be used to control external motorized devices such as the PAN / TILT unit to power the camera. On this page you can set the unit address to be controlled via RS485 and the data communication protocol to be used on the RS485 port.
  • Page 20 On this page you can set the communication parameters. The camera address is set in the section instead DEVICE CONFIGURATION / PTZ DOME EXTERNAL DEVICE / CASH REGISTER DSE SRL - ITALY - WWW.DSE.EU...
  • Page 21 Page: 21 The RS485 port available in some cameras RH Series can be used not only for connecting Pan Tilt units and external keyboards, also to interface the camera with a cash register so you can record video overlay in the cash flow. Here you can set the X / Y coordinates where to bring up the overlay and all communication parameters.
  • Page 22 STANDARD RH - IP CAMERAS ONVIF Page: 22 Page: 22 Some RH series cameras have alarm inputs and outputs that are configurable in this section. For correct wiring, refer to the installation manual. ALARM IN - Select the camera alarm input.
  • Page 23 The RH cameras can accommodate within them a microSD memory to record images independently. In this section you can define whether an alarm in case of almost full memory (set the percentage) or in the case of writing errors (SD card needed replacing) ALARM CONFIGURATION / I / O ALARM LINKAGE DSE SRL - ITALY - WWW.DSE.EU...
  • Page 24 3 time slots in which to enable the activation of alarms. In the example that follows in the figure it is enabled the alarm function on weekdays from 8 to 19 and all day during the weekend. CAUTION - The factory is not enabled any time slot. At least one set to be able to activate the detection DSE SRL - ITALY - WWW.DSE.EU...
  • Page 25 / pattern). These cameras are for this reason equipped with a number of inputs in order to control the camera has moved according to the activation of sensors local or microswitches. CONFIGURATION ALARM / MOTION ALARM DSE SRL - ITALY - WWW.DSE.EU...
  • Page 26 In the example that follows in the figure it is enabled the alarm function on weekdays from 8 to 19 and all day during the weekend. CAUTION - The factory is not enabled any time slot. At least one set to be able to activate the detection DSE SRL - ITALY - WWW.DSE.EU...
  • Page 27 MASK AREA - Drag the mouse on the screen to define the area where it will NOT valid detection. To remove the mask, click the right mouse button. SENSITIVITY - Adjust the sensitivity of detection Low, Medium, High. SENSITIVITY - Adjust the sensitivity of detection Low, Medium, High. DSE SRL - ITALY - WWW.DSE.EU...
  • Page 28 PTZ - In the motorized speed dome cameras it is possible by following the activation of the motion invoke an automatic shift function (preset, tour, scan, track / pattern). ALARM CONFIGURATION / SETTING ALARM DSE SRL - ITALY - WWW.DSE.EU...
  • Page 29 The RH cameras can accommodate a microSD card inside to record video locally on the camera. In this section you set the recording options. SCHEDULE RECORD - The first section allows you to set continuous recording or SCHEDULE RECORD - The first section allows you to set continuous recording or DSE SRL - ITALY - WWW.DSE.EU...
  • Page 30 FILING ON SD CARD In the first DISK NAME box to choose SD card DSE SRL - ITALY - WWW.DSE.EU...
  • Page 31 CAUTION - To be able to proceed with formatting is necessary that the scheduled recordings and / or are suspended alarm, by acting on the buttons enables / disables the corresponding sections of the RECORD POLICY table already illustrated above. DSE SRL - ITALY - WWW.DSE.EU...
  • Page 32 The storage on a NAS on the network is very convenient because it allows you to record images without taking an always running PC. In the first DISK NAME box, click NAS and click DSE SRL - ITALY - WWW.DSE.EU...

  • Page 33: Privacy Masking

    NAS. Alternatively it is possible to choose USE ALL SPACE to allow the use of the whole memory capacity. PRIVACY MASKING The RH cameras allow you to set privacy zones to mask images to view that jeopardize the privacy, such as a worker to work in a company DSE SRL - ITALY - WWW.DSE.EU...
  • Page 34 E 'can set multiple masks, but their total area can not exceed 8% of the total image. To eliminate the masks to use the RESET button. Any change requires you to press the OK button to apply. NETWORK SERVICE / PPPoE DSE SRL - ITALY - WWW.DSE.EU...
  • Page 35 In this case, the camera is able to make the LOG IN to gain access to the Internet using PPPoE. Click ENABLE PPPoE to enable this feature and enter your log in credentials. When you turn the camera will automatically log in to establish the connection to the Internet. SERVICE NETWORK / DDNS DSE SRL - ITALY - WWW.DSE.EU...
  • Page 36 SERVICE CENTER / ALARM CENTER The RH series cameras are able to send alarm messages to the NetVMS control software (see separate manual). In this section you set the IP address of the PC where you install the software and NetVMS the communications port used for sending alarms to default in the software is the 30004.
  • Page 37 USER NAME / PASSWORD - If the SMTP server requires a user name and password to send email, you can enter them. Typically Italian USER NAME / PASSWORD - If the SMTP server requires a user name and password to send email, you can enter them. Typically Italian provider does not require this authentication. DSE SRL - ITALY - WWW.DSE.EU...
  • Page 38 OPERATOR - Access to all functions except those of the administrative level (changing codes etc.) OPERATOR - Access to all functions except those of the administrative level (changing codes etc.) AVERAGE USER - Access to display only AVERAGE USER - Access to display only DSE SRL - ITALY - WWW.DSE.EU...
  • Page 39 The LOG-IN MULTI option allows the user to log in simultaneously from multiple locations (client) simultaneously. As of firmware version 1.8 you can not change the admin password in this section. To do this act on the CHANGE PASSWORD button at the top right. PROTOCOL DSE SRL - ITALY - WWW.DSE.EU...

  • Page 40: Device Restart

    The ONVIF protocol provides the ability to use as a security option user verification. DEVICE RESTART This window allows you to reboot the camera DEFAULT SETTING This window allows you to restore the factory settings. DSE SRL - ITALY - WWW.DSE.EU...
  • Page 41 To access the C-MOS's settings, you click the right button in the live video pane and choose SENSOR CONFIG. A window opens with several folders is explained in detail in the separate manual on the CD. DSE SRL - ITALY - WWW.DSE.EU...