Advertisement
Available languages
Available languages
English
52
Repeat CD-Track
Repeat CD
End Repeat
A-B Repeat
DVD-Menu
Fast Forward or Rewind
Enlarge Picture
1. Select the track to be repeated.
2. Press the REPEAT button (Fig.3/10). "Track" is displayed.
Press the REPEAT (Fig. 3/10) button again until "All" is displayed
Repeatedly press the REPEAT button (Fig. 3/10), until the message
disappears from the screen.
You can freely define a section to be repeated.
Please follow these steps:
1. During playback press the A-B button (Fig. 3/9) on the remote
control once to mark the beginning of the loop. "A" is displayed.
2. Mark the end of the section by pressing the A-B button again.
"A b" is displayed. The selected section is now repeate.
Stop the A-B repeat function by pressing the A-B a third time.
NOTE:
For MP3 CDs the section to be repeated must be within the same
track.
Ordinarily each DVD features an individual menu. Here you may select
chapters, change settings, etc. This menu is CD speciic, therefore no
additional information is available.
Press the MENU button (Fig. 3/8), to start the DVD-menu. Navigate
the menu using the navigation buttons (Fig. 3/12). Confirm the entry
by pressing the ENTER button (Fig. 3/13).
If you are in a menu area that enables you to select a chapter directly
you may use the numeric buttons (Fig. 3/15) on your remote control
to make your selection.
The DVD-Player features a fast forward and rewind option.
1. Press
or
(Fig. 3/12) to start fast forward or rewind. The cur-
rent direction and speed are displayed, eg. " 2x".
2. Press the
or
button repeatedly to change the speed. The speed
may be accelerated by factor 2, 4, 8 or 32.
3. Press the "
PLAY/PAUSE" button (Fig. 3/5) to continue normal
play upon reaching the desired passage.
Upon viewing DVDs, VCDs or pictures you may modify the picture
appearance.
1. Press the SHIFT button (Fig. 3/14), to activate the special functions
of the numeric buttons (1, 2, 3, 5, 6, 9, 0).
2. Press 1/ ZOOM button (Fig. 3/15), to modify the picture segment.
Press the button repeatedly to select the applicable zoom-factor or
to return to the default zoom-factor.
NOTE:
You may navigate within the zoomed picture using the navigation
buttons (Fig. 3/12).
Advertisement
Chapters
