Advertisement
Available languages
Available languages
Private Listening with Earphones/
Headphones (Fig. 1/3; Fig. 2/3)
Side Panel Inputs
NOTE:
■
Playback stops if the charge of the battery is too low.
■
The charge is low if "LOW BATTERY" is displayed. Charge the bat-
tery now.
■
Charge the battery directly before use.
■
You can also charge the battery via the car adaptor.
CAUTION:
■
Do not short-circuit the terminals.
■
Only use the genuine charger to charge the battery.
Change Fuse for 12V adaptor
NOTE:
Make sure that no hardware is lost when removing the fuse. Also
ensure that hardware is fitted back into the correct place.
If the device does not work when using the 12V cigarette lighter
adapter, change the fuse. This can be found in the top of the 12V
adapter.
■
Unscrew the black, flat endpiece (A).
■
Remove the fuse (C) and replace it with a 2A new time delay fuse.
■
Ensure that the silver tip (B) is fitted into the endpiece. Screw the
endpiece back on.
Connections
1. For private listening use headphones with 3.5 mm stereo jack and
connect to earphones jack ( ) .
2. Press VOL+/ VOL- to increase or decrease the volume.
WARNING:
■
Do not adjust the headphone volume to loud. This may be hazard-
ous to your hearing and you may endanger others and yourself.
■
Adjust to a low volume to avoid disrupting your surroundings.
■
If you sufer from tinnitus, keep volume to a minimum or refrain
from use of this unit.
■
Otologists advise a against long term use of headphones over an
extended period of time.
USB port (Fig. 1/4)
Connect a USB device directly to the port on the right side of the unit.
Card slot (Fig. 1/5)
Insert an MMC/SD or MS card with the label to the front in the card
slot on the front of the unit.
English
47
Advertisement
Chapters
