Download Print this page

AEG ETV DVD 4549 LCD Instruction Manual page 51

Dvd car cinema

Advertisement

Available languages

Available languages

Pause Playback
Change Audio-Language/Audio-
Mode
Show Sub-Titles
Stop Playback
Select previous Chapter/ Track
Select next Chapter/Track
Direct Track Selection
Select a Passage using the Menu
Repeat DVD-Title/Chapter
1. Press the "
PLAY/PAUSE" button (Fig. 3/5) on the remote con-
trol. The plaback is interrupted and the current image is frozen.
2. Press the "
PLAY/PAUSE" button (Fig. 3/5) on the remote con-
trol, to restart "normal" play.
Press the AUDIO button (Fig. 3/3) repeatedly to change the audio-
language. The available languages are dependent on the DVD.
NOTE:
If the medium does not support this function, (e.g. on a CD), you
can change the audio mode with this button, e.g. set it to "mono" or
"stereo".
1. Press the SHIFT button (Fig. 3/14), to activate the special functions
of the numeric buttons (1, 2, 3, 5, 6, 9, 0).
2. Press the 0/ SUBTITLE button (Fig. 3/15) repeatedly if you want
to activate, deactivate or select a diferent subtitle language. The
available subtitle languages are dependent on the DVD.
During playback press "
play.
Press the "
PLAY/PAUSE" button again (Fig. 3/5) to continue
the playback from the last position.
STOP" button twice (Fig. 3/5) to stop reply entirely.
Press the "
If you press the "
PLAY/PAUSE" button (Fig. 3/5) again, the
CD/DVD will start from the beginning.
Press " " button (Fig. 3/12) to return to the beginning of the pre-
vous chapter or track.
Press " " button (Fig. 3/12), to forward to the next chapter or track.
Enter the number of the desired chapter/track using the numeric but-
tons on your remote control (Fig. 3/15).
Playback will start shortly.
For your convenience, you may select respective media passages
directly from you screen menu as follows:
1. Press the TIME button (Fig. 3/4). The menu on the left is displayed.
2. Use the navigation buttons (Fig. 3/12) to select the category.
Confirm your selection with the ENTER button (Fig. 3/13).
3. Enter the moment in time for playback to start. Depending on the
media type this can be a track number, a chapter or a time. Enter
the values with the numeric buttons (Fig. 3/15). Playback starts
after a short moment.
4. Press the TIME button again to display the menu.
1. Select chapter or title to be repeated.
2. Press the REPEAT button (Fig. 3/10). "Chapter" is displayed.
3. Press the REPEAT button again until "Title" or "All" is displayed.
English
STOP" button (Fig. 3/5). This will stop
51

Advertisement

Chapters

loading