Download Print this page

AEG ETV DVD 4549 LCD Instruction Manual page 45

Dvd car cinema

Advertisement

Available languages

Available languages

B. With Car Adaptor
1. Connect the AC adapter cable to the DC IN connector (Fig. 1/7) of
the device.
2. To operate both devices:
- Connect the AC adapter plug to the DC IN 9V connector
(Fig. 2/4).
- Connect the mains/AV connector cable to the DC IN/AV OUT
connector on the DVD MONITOR (Fig. 1/7, 8) and the DC OUT/
AV connector on the LCD MONITOR (Fig. 2/6, 7).
3. Connect the AC adapter to a properly installed Schuko socket. The
charge indicator turns on red (Fig. 1/2).
CAUTION:
The enclosed alternate current adapter is intended for use with
this unit only. Do not use with other unit.
If the unit is not in use for an extended period of time the
alternate current adapter must be disconnected from the power
outlet.
Use the 12V car adaptor for vehicles with 12V power supply, negative
ground.
Connect the cigaratte lighter adapter to the DC IN connector
(Fig. 1/7).
Using both units:
-
Connect the cigarette lighter adapter plug to the DC IN 9V
connector (Fig. 2/4).
-
Connect the mains/AV cable to DC IN/AV OUT connector from
DVD MONITOR (Fig. 1/7, 8) and DC OUT/AV IN connector from
LCD MONITOR (Fig. 2/6, 7).
Now connect the plug to the cigarette lighter of your vehicle.
Safety Precautions:
Only use this unit with the genuine car adaptor, other adaptors
can damage the unit.
Only use the genuine car adaptor for this unit. Do not use for
other units.
Do not use the unit while driving. Ensure that the unit is fastened
and/or stored properly to avoid injuries in case of accident.
NOTE:
The supplied fixing belts are only intended for use when the
vehicle is parked.
WARNING:
The fixing belts are not suitable for use when driving. Risk of
injuries!
English
45

Advertisement

Chapters

loading