Brinkmann Pitmaster Delux Charcoal/Wood Smoker Owner's Manual page 5

Firebox
Opening
Grease Hole
Cooking
Chamber
Wire Rack
Top View
" Hex Nut
" Flat Washer
Leg w/o Axle
Clear an assembly area and get a friend to help
you put your smoker together. Lay cardboard
down to protect smoker finish and assembly
area.
Step 1
Place the large cooking chamber on its
closed end with the door open. Make sure
that another person is holding the cooking
chamber steady. The opening to the firebox
should be facing up as illustrated.
Step 2
Install the plastic end caps into the two legs
without the wheel axle. Using a block of
wood and hammer, tap the cap into place.
Step 3
With the chamber standing on its closed
end, attach the first two legs (without axles)
to the end closest to firebox opening. Align
the bolts of one leg with the pre-drilled
holes in the smoker chamber as illustrated.
Insert bolts and place a washer, then a hex
nut over the leg bolts and hand tighten
only. Do not attach a second leg yet.
Step 4
Insert the wire rack (curved end pointed
down) into the mounted leg. Insert wire
rack into other leg. Attach second leg onto
cooking chamber using the same technique
described in Step 4. Do not overtighten.
4