Before Operation - Sanyo CDP-M420 Instruction Manual

BEFORE OPERATION

Anti rolling shock function
In the previous anti-shock function, when skips occurred while available memory runs
out, then the sound would suffer some interruption.
The new anti rolling shock function is designed to prevent skipping to the greatest extent
possible instead of supplementing the skipped portion of the sound.
This is achieved by expanding the memory capacity, and in addition full attention has
been given also to increasing the unit's signal reading capability.
Moreover, consideration has been given to eliminating the basic causes of skipping, both
from the standpoint of horizontal shock and vertical shock.
Use this function when listening during walk or playing in a car.
When the i button is pressed first time, the anti rolling shock function turns on
automatically. "ESP" appears on the display. Then "ESP" is remain standby when the
buffer memory is full of next 45 seconds music data to Music CD and full of next 120
seconds music data to MP3 CD. (Fig. 4)
Note:
• Press the ALBUM/ASR button to turn the anti rolling shock function off. "ESP"
disappears. Press the button again to turn it on.
• Sound may skip or mute for a few seconds when you press the ALBUM/ASR button
during play.
• Playing may stop when the unit gets strong shock even when the anti rolling shock
function is on.
• When playing back MP3 CD, this function always works even if "ESP" doesn't appear.
(The function is not cancelled by pressing the ALBUM/ASR button.)
CDP-M420_XE
12
12
16/04/2004, 12:06