Epson TM-P60 Installation Manual page 3

TM-P60 Wireless Thermal Printer Information/Requirements
Requirements:
1. An available wireless network:
This network must be setup and configured prior to any configuration from pcAmerica.
 The following network types are supported with the use of the TM-P60 Thermal Receipt
Printer:
o WEP Encryption (64-bit and 128-bit)
o Open Networks (without encryption)
 WPA Encryption (TKIP and AES) is NOT supported.
2. Information on the wireless network which you will be connecting the printer to:

SSID (or network name)

Wireless Password

Subnet mask of the network

IP Address of the router (Default Gateway)
3. A laptop or PC with a wireless adapter for configuration of the device
3 | P a g e