Epson TM-P60 Installation Manual page 16

4. Select the TCP/IP tab.
5. Select Manual for IP Address Setting.
6. Assign the IP address, the Subnet mask, and the Default
gateway:

IP Address - Enter a IP Address that is in the scope of
your routers DHCP settings.

Subnet Mask - Enter the Subnet Mask for the
network.

Default Gateway - Enter the IP Address of the router
or DHCP server.
Ask your administrator for the IP address, Subnet Mask and
the Default gateway to be set.
7. Select OK.
8. Select the Wireless tab.
9. Select Infrastructure for the Communication Mode.
10. For SSID enter the SSID for the network (i.e. STORE).
11. Under Security Settings select the network security
type, either None or WEP.
12. If WEP is selected enter the following information:

Optionally select Input using hex.

Active WEP Key: - Use the dropdown to select the
WEP key that is actively being used.

WEP Key1 through WEP Key4: - Enter the WEP
network keys to connect to the network.
Ask your administrator for any of the above information.
13. Select OK.
16 | P a g e