Hoover PRB2500B User Manual page 6

Hide thumbs Also See for PRB2500B:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Important Safety Instructions
• The plug must be removed from the socket-outlet before
the water reservoir is filled with water.
• The surfaces with
• To have a electronic copy of the instruction manual
contact the after sales service in guarantee card.
• The iron must be used and rested on a stable surface.
Chapter 1: Preparation for Use
Due to the powerful output of steam, Hoover recommends the use
of an active ironing board with blowing and vacuuming function
which allows escape of any excess steam.
Place the ironing system on a stable and level surface, for example
on the hard part of an ironing board or on a heat-resistant surface.
IMPORTANT: Ensure your appliance is unlocked before switching the
power on (Fig 4).
Chapter 1.1 : What Kind of Water May be Used?
The Hoover ironing system has been designed to be used with tap water only.
There is no need to use distilled or pure distilled water.
Nevertheless, in case you live in a hard water area, you can mix 50% of distilled water with 50% of tap water.
Do not use any other kind of water or do not add other contents to water tank as it can damage your appliance.
Chapter 1.2 : Filling the Water Tank
Switch off the appliance and unplug it.
Open the water tank cap (7) to gain access to the water tank.
Fill the tank with Tap water and ensure you do not exceed the MAX mark.
WARNINg: Do not add vinegar, hot water, perfume, or any other kind of
chemical agents or any other contents in the water tank. IT COULD DAMAgE
THE STEAM gENERATOR AND SHORTEN ITS LIFE USE.
Chapter 1.3 - Switching on the Appliance
Dry mode:
Connect the appliance with the mains cord to the earthed socket, press on the main switch (13), the light
illuminate means the appliance is switched on. Turn the temperature dial (10) to your desired setting, the iron
light (10) illuminates meaning the soleplate is heating up, after approximately 1 minute, the steam ready light
(14) will light off, then you can start ironing.
Steam mode:
Connect the appliance with the mains cord to the earthed socket, press on the main switch (13), the light
illuminates indicating the appliance is switched on. Then press on the "steam ON/OFF" button (15), the light wiil
illuminate meaning the boiler is running.
4
GB
are liable to get hot during use.
1
Fig. 4: Unlock & Switch on Iron System
1
2
3
Fig. 5: Water Tank Filling

Advertisement

Table of Contents
loading

Table of Contents