Care And Maintenance - Hitachi SF-250ZFVAD Instruction Manual

Care and Maintenance

Cleaning the lint fi lter (cassette type)
Press down on the knob on the top of the lint fi lter (cassette type) and pull it towards you.
Open the lint fi lter (cassette type) to the sides and remove the lint that is inside.
Reverse the procedure to replace the lint fi lter (cassette type).
Lint
Filter
Cleaning the dispenser
Pull the dispenser and tilt it upwards to remove it.
Pull off the caps and Easy Dissolver.
Clean with some tool such as brush.
To remount, tilt the dispenser, align the rib to guide and insert it.
n When you replace the caps, press it until it stops completely. If it is not pressed all the way in, the
softener, liquid detergent and liquid bleach will not be added to the tub completely and some will remain
in the dispenser.
Cleaning the water supply inlet
1 Close the tap.
2 Disconnect the water supply hose from the top of the
washing machine. (Water in the hose may be drained
when you disconnect the hose.)
3 Use a brush or something to clean the water supply inlet
of the washing machine.
4 Reverse the procedure to replace the water supply hose.
Care and maintenance of the washing machine
n Clean the machine body.
n Wipe the outside of the washing machine with a soft cloth. Do not use solvents such as alcohol or
benzine.
n If you use a chemically treated cloth, use it according to the instructions given for the product.
n If detergent or softener gets on the washing machine, quickly wipe it off . The surface could be damaged.
34
Remove
Lint
Water Inlet valve
Caps Easy Dissolver
Water supply hose