Hitachi SF-250ZFVAD Instruction Manual page 23

How to Use the Washing Machine
How to use the 60°C Allergy Care program
n You can wash away the bacterium that causes unpleasant smell from your laundry by using hot water of
60°C (up to 6 kg).
 Total operation time is about 5 hours.
Up to
6kg.
Operation:
Press the Power button to turn
on the power.
Select the 60°C Allergy Care
program.
Press the Start/Pause button.
Put the standard amount of
detergent according to the
water amount indication and
close the lid.
● Do not wash with clothes which are susceptible to color fading.
● Do not wash easy-to-shrink clothes such as wool.
● Do not wash easily damageable clothes such as rayon or silk.
● Beware of burns when opening the lid by temporary stopping the operation as the washing water and
inside components might be hot.
NOTICE
● If you have a model that has "Auto dosing" function and already set this function, you don't need to
input detergent manually.
● Water droplets might stick to inside of the lid. Please wipe with a dry cloth after using the washing
machine.
● As additional heating is carried out when temperature does not reach to the specifi ed degree,
operation time might be extended.
● Beware of burns as the water temperature reaches more than 60°C.
● Beware of burns since hot water of more than 60°C might be drained.
● After washing cycle, water is supplied for cooling.
● Depending on the temperature of tap water, it may be faster than the initial display time.
● When the tap water temperature is low, operation time might be extended to a maximum of
approximately 6 hours.
● Do not soak your laundry for too long in hot water of 60°C.
● The glass lid and the display screen may become foggy with this program, but this is not failure.
The fog disappears in approximately 24 hours and it does not aff ect the operation.
Sensing
Heating at 60°C
Dissolving
about 4 hours
Washing
CAUTION
Rinsing Spin-Drying
1
3
2
23